开机时卡在迅为logo静止画面

advmeds

个未先进好我使用身边的4412版子

发现开机的时候会有机会卡在迅为logo静止画面

使用RS232接机器log发现在执行

[    9.400522] init: /dev/hw_random not found

后就无法进入了

因此想请教各为这段内容是执行什么样的函式呢?

[   19.420017] mmc0: Timeout waiting for hardware interrupt.

[   19.424335] ------------[ cut here ]------------

[   19.428553] WARNING: at drivers/mmc/host/mshci.c:799 mshci_send_command+0x69c/0x6dc()

[   19.436352] Modules linked in: wlan_mt6620 mtk_wmt_wifi bt_uhid mtk_stp_bt mtk_stp_uart mtk_stp_wmt mtk_hif_sdio

[   19.446508] Backtrace:

[   19.448953] [<c004ae70>] (dump_backtrace+0x0/0x11c) from [<c05b66f4>] (dump_stack+0x18/0x1c)

[   19.457359]  r6:c08b12f4 r5:0000031f r4:00000000 r3:d2076000

[   19.463008] [<c05b66dc>] (dump_stack+0x0/0x1c) from [<c0080a94>] (warn_slowpath_common+0x5c/0x6c)

[   19.471859] [<c0080a38>] (warn_slowpath_common+0x0/0x6c) from [<c0080ac8>] (warn_slowpath_null+0x24/0x2c)

[   19.481402]  r8:d20153d4 r7:00000002 r6:d2209e5c r5:d2209e8c r4:d2015320

[   19.487911] r3:00000009

[   19.490521] [<c0080aa4>] (warn_slowpath_null+0x0/0x2c) from [<c03d1d08>] (mshci_send_command+0x69c/0x6dc)

[   19.500069] [<c03d166c>] (mshci_send_command+0x0/0x6dc) from [<c03d2498>] (mshci_finish_data+0x64/0x1cc)

[   19.509530] [<c03d2434>] (mshci_finish_data+0x0/0x1cc) from [<c03d29d8>] (mshci_timeout_timer+0x7c/0xc8)

[   19.518986]  r7:c08f6080 r6:60070113 r5:d2015340 r4:d2015320

[   19.524636] [<c03d295c>] (mshci_timeout_timer+0x0/0xc8) from [<c009047c>] (run_timer_softirq+0x16c/0x3b4)

[   19.534176]  r6:d2076000 r5:d2064000 r4:d2077e30 r3:c03d295c

[   19.539823] [<c0090310>] (run_timer_softirq+0x0/0x3b4) from [<c0088950>] (__do_softirq+0xd0/0x288)

[   19.548763] [<c0088880>] (__do_softirq+0x0/0x288) from [<c0088da8>] (irq_exit+0xb4/0xb8)

[   19.556836] [<c0088cf4>] (irq_exit+0x0/0xb8) from [<c004c248>] (ipi_timer+0x48/0x4c)

[   19.564556]  r4:c003d040 r3:00000001

[   19.568123] [<c004c200>] (ipi_timer+0x0/0x4c) from [<c003f460>] (do_local_timer+0x68/0x84)

[   19.576361]  r6:00000000 r5:c003ddec r4:c09048f0 r3:c09bca20

[   19.582008] [<c003f3f8>] (do_local_timer+0x0/0x84) from [<c0046380>] (__irq_svc+0x80/0x14c)

[   19.590337] Exception stack(0xd2077f10 to 0xd2077f58)

[   19.595372] 7f00:                                     233319c0 00000000 06d9a740 0001c0ef

[   19.603533] 7f20: c0999f1c c0999884 00000000 c09ce038 00000003 c099825c c12580b8 d2077f7c

[   19.611691] 7f40: 00703bdb d2077f58 06422c49 c005c884 80070013 ffffffff

[   19.618285]  r7:00000002 r6:0000001c r5:f881c000 r4:ffffffff

[   19.623936] [<c005c844>] (exynos4_enter_idle+0x0/0x17c) from [<c03be4f8>] (cpuidle_idle_call+0xdc/0x264)

[   19.633388]  r5:c0999884 r4:c12580a8

[   19.636951] [<c03be41c>] (cpuidle_idle_call+0x0/0x264) from [<c0048240>] (cpu_idle+0xd0/0x104)

[   19.645546] [<c0048170>] (cpu_idle+0x0/0x104) from [<c05b36ac>] (secondary_start_kernel+0x17c/0x180)

[   19.654655]  r7:c0999a34 r6:d2076000 r5:c090472c r4:c0925560

[   19.660301] [<c05b3530>] (secondary_start_kernel+0x0/0x180) from [<405b31f4>] (0x405b31f4)

[   19.668542]  r6:10c0387d r5:00000015 r4:5207806a r3:c05b31dc

[   19.674185] ---[ end trace 3728bf451b459b4c ]---

[   29.440015] mmc0: Timeout waiting for hardware interrupt.

[   29.444340] mmcblk0: retrying using single block read

[   39.480016] mmc0: Timeout waiting for hardware interrupt.

[   49.520015] mmc0: Timeout waiting for hardware interrupt.

[   49.524333] mmcblk0: error -110 sending status command

[   49.528896] mmcblk0: error -110 transferring data, sector 250685, nr 8, card status 0x0

[   59.560015] mmc0: Timeout waiting for hardware interrupt.

[   69.600015] mmc0: Timeout waiting for hardware interrupt.

[   69.604332] mmcblk0: error -110 sending status command

[   69.608896] mmcblk0: error -110 transferring data, sector 250686, nr 7, card status 0x0

[   79.640015] mmc0: Timeout waiting for hardware interrupt.

[   89.680015] mmc0: Timeout waiting for hardware interrupt.

[   89.684332] mmcblk0: error -110 sending status command

[   89.688895] mmcblk0: error -110 transferring data, sector 250687, nr 6, card status 0x0

[   99.720015] mmc0: Timeout waiting for hardware interrupt.

[  106.192840] mmc0: Controller never released  data0.

[  106.196668] mmcblk0: error -131 sending status command

[  106.201207] mmcblk0: error -110 transferring data, sector 250688, nr 5, card status 0x0

[  107.259185] mmc0: Controller never released  data0.

[  108.312664] mmc0: Controller never released  data0.

[  108.316477] mmcblk0: error -131 sending status command

[  108.321026] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0

[  115.739069] mmc0: Controller never released  data0.

[  115.742889] mmcblk0: retrying using single block read

[  116.797289] mmc0: Controller never released  data0.

[  117.850746] mmc0: Controller never released  data0.

[  117.854544] mmcblk0: error -131 sending status command

[  117.859106] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0

[  118.917214] mmc0: Controller never released  data0.

[  119.970740] mmc0: Controller never released  data0.

[  119.974538] mmcblk0: error -131 sending status command

[  119.979101] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0

[  121.037207] mmc0: Controller never released  data0.

[  122.090681] mmc0: Controller never released  data0.

[  122.094479] mmcblk0: error -131 sending status command

[  122.099042] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0

[  123.157183] mmc0: Controller never released  data0.

[  124.210647] mmc0: Controller never released  data0.

[  124.214450] mmcblk0: error -131 sending status command

[  124.219011] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0

[  125.277106] mmc0: Controller never released  data0.

[  126.330588] mmc0: Controller never released  data0.

[  126.334392] mmcblk0: error -131 sending status command

[  126.338956] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0

[  131.636979] mmc0: Controller never released  data0.

[  132.690445] mmc0: Controller never released  data0.

[  132.694244] mmcblk0: error -131 sending status command

[  132.698807] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0

[  133.757084] mmc0: Controller never released  data0.

[  133.760901] mmcblk0: retrying using single block read

[  134.815332] mmc0: Controller never released  data0.

[  135.868775] mmc0: Controller never released  data0.

[  135.872586] mmcblk0: error -131 sending status command

[  135.877136] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0

[  149.654697] mmc0: Controller never released  data0.

[  150.708155] mmc0: Controller never released  data0.

[  150.711968] mmcblk0: error -131 sending status command

[  150.716516] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0

[  151.205661] healthd: wakealarm_init: timerfd_create failed

[  151.209850] healthd: No charger supplies found

[  151.220022] healthd: BatteryStatusPath not found

[  151.223163] healthd: BatteryHealthPath not found

[  151.235020] healthd: BatteryPresentPath not found

[  151.238248] healthd: BatteryCapacityPath not found

[  151.250019] healthd: BatteryVoltagePath not found

[  151.253247] healthd: BatteryTemperaturePath not found

[  151.270021] healthd: BatteryTechnologyPath not found

TOPEET_moon

使用我们编译好的镜像也是这样的问题么？

advmeds

TOPEET_moon 发表于 2017-11-20 16:19
使用我们编译好的镜像也是这样的问题么？

没错是从云盘下载的system.img
Android  4.4.4  版本
但不是每台都会这样

admin

使用不带wifi的试试~你使用的是精英版还是全能版？
可以联系下qq群的技术支持

leani

您好，我也碰到了同样的问题，但是调试无从下手啊,请问您解决了吗，是怎么解决的呢？求指导，谢谢！

admin

leani 发表于 2019-3-29 09:49
您好，我也碰到了同样的问题，但是调试无从下手啊,请问您解决了吗，是怎么解决的呢？求指导，谢谢！

把你的问题稍微详细描述下

leani

admin 发表于 2019-3-30 11:33
把你的问题稍微详细描述下

您好，我的设备大部分时候运行没有问题，但是偶尔会出现卡在开机logo界面的情况，我在下面贴出打印日志。
错误日志-1：
[    4.626963] mmc0:mshci_set_clock, 50000000@ration:4,11[mjdbg] cmu_set_clock: 50000000
[    4.644701] mmc0: new high speed DDR MMC card at address 0001
[    4.649323] mmcblk0: mmc0:0001 8WPD3R 7.28 GiB
[    4.655620]  mmcblk0: p1 p2 p3 p4
[    4.685059] *******mmc1: inserted!!!!!******
[    4.735064] *******mmc1: inserted!!!!!******
[    4.785087] *******mmc1: inserted!!!!!******
[    4.835129] *******mmc1: inserted!!!!!******
[    4.885068] *******mmc2: inserted!!!!!******
[    4.935075] *******mmc2: inserted!!!!!******
[    4.990087] *******mmc2: inserted!!!!!******
[    5.045128] *******mmc2: inserted!!!!!******
[    9.630050] s3c-i2c s3c2440-i2c.4: timeout waiting for bus idle
[    9.634502] wm8960-codec 4-001a: Failed to issue reset
[    9.639637] wm8960-codec 4-001a: asoc: failed to probe CODEC wm8960-codec.4-001a: -5
[    9.647399] asoc: failed to instantiate card iTOP-4412-Audio: -5
[    9.653374] Samsung SRP driver, (c) 2010 Samsung Electronics
[    9.667381] SRP: Driver successfully probed
[    9.670255] ALSA device list:
[    9.673035]   No soundcards found.
[    9.676513] GACT probability NOT on
[    9.679897] Mirror/redirect action on
[    9.683557] u32 classifier
[    9.686242]     Actions configured
[    9.689616] Netfilter messages via NETLINK v0.30.
[    9.694374] nf_conntrack version 0.5.0 (8566 buckets, 34264 max)
[    9.701047] ctnetlink v0.93: registering with nfnetlink.
[    9.705624] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    9.712542] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    9.718637] xt_time: kernel timezone is -0000
[    9.724040] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.728122] arp_tables: (C) 2002 David S. Miller
[    9.732633] TCP cubic registered
[    9.735805] Initializing XFRM netlink socket
[    9.741004] NET: Registered protocol family 10
[    9.747516] Mobile IPv6
[    9.748504] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.754079] IPv6 over IPv4 tunneling driver
[    9.762366] NET: Registered protocol family 17
[    9.765372] NET: Registered protocol family 15
[    9.769757] can: controller area network core (rev 20090105 abi 8)
[    9.776001] NET: Registered protocol family 29
[    9.780362] can: raw protocol (rev 20090105)
[    9.784692] Bluetooth: RFCOMM TTY layer initialized
[    9.789481] Bluetooth: RFCOMM socket layer initialized
[    9.794594] Bluetooth: RFCOMM ver 1.11
[    9.798327] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.803620] Bluetooth: BNEP filters: protocol multicast
[    9.808846] NET: Registered protocol family 35
[    9.813525] EXYNOS4X12: Adaptive Support Voltage init
[    9.818294] EXYNOS4X12(SG):  ORIG : 5 MOD : 0 RESULT : 5
[    9.823585] EXYNOS4X12(SG):  ORIG : 5 MOD : 0 RESULT : 5
[    9.828883] exynos4x12_set_abb:0x0, 0x0, 0x0, 0x0, 0x8000008e
[    9.834607] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    9.842256] Registering SWP/SWPB emulation handler
[    9.847026] DVFS : VDD_ARM Voltage table set with 5 Group
[    9.852403] exynos4x12_volt_table[0]:1375000
[    9.856655] exynos4x12_volt_table[1]:1350000
[    9.860908] exynos4x12_volt_table[2]:1300000
[    9.865161] exynos4x12_volt_table[3]:1275000
[    9.869403] exynos4x12_volt_table[4]:1212500
[    9.873667] exynos4x12_volt_table[5]:1175000
[    9.877920] exynos4x12_volt_table[6]:1162500
[    9.882173] exynos4x12_volt_table[7]:1162500
[    9.886426] exynos4x12_volt_table[8]:1062500
[    9.890684] exynos4x12_volt_table[9]:1037500
[    9.894923] exynos4x12_volt_table[10]:1025000
[    9.899274] exynos4x12_volt_table[11]:1000000
[    9.903613] exynos4x12_volt_table[12]:987500
[    9.907866] exynos4x12_volt_table[13]:975000
[    9.912119] exynos4x12_cpufreq_init:topeet scp
[    9.916919] [ 302612 ] Memory Type Undertermined.
[    9.921242] DVFS : VDD_INT Voltage table set with 5 Group
[    9.970212] exynos4_integrated_dvfs_hotplug_init, max(1400000),min(200000)
[    9.979241] regulator_init_complete: VDD18_MIPI: incomplete constraints, leaving on
[    9.987284] regulator_init_complete: VDD10_MIPI: incomplete constraints, leaving on
[    9.993951] regulator_init_complete: VDD18_2M: incomplete constraints, leaving on
[   10.002767] regulator_init_complete: vdd_int range: incomplete constraints, leaving on
[   10.009693] regulator_init_complete: vdd_arm range: incomplete constraints, leaving on
[   10.017595] regulator_init_complete: vdd_mif range: incomplete constraints, leaving on
[   10.025668] USB_DEVICE_ATTACHED
[   10.031568] exynos_usb_Device: Exynos USB Device Driver
[   10.035348] <<-GTP-INFO->> GTP driver installing...
[   10.040323] <<-GTP-INFO->> GTP Driver Version: V2.2<2014/01/14>
[   10.046111] <<-GTP-INFO->> GTP Driver Built@05:15:32, Jan  3 2019
[   10.051676] android_work: did not send uevent (0 0   (null))
[   10.057853] <<-GTP-INFO->> GTP I2C Address: 0x5d
[   10.062430] <<-GTP-INFO->> Guitar reset
[   10.171738] <<-GTP-INFO->> IC Version: 911_1060
[   10.175970] <<-GTP-INFO->> CTP_CONFIG_GROUP1 used, config length: 186
[   10.182410] <<-GTP-INFO->> Driver send config.
[   10.209988] <<-GTP-INFO->> X_MAX: 800, Y_MAX: 1280, TRIGGER: 0x00
[   10.225175] <<-GTP-INFO->> create proc entry gt9xx_config success
[   10.230484] input: goodix-ts as /devices/virtual/input/input1
[   10.240286] <<-GTP-INFO->> GTP works in interrupt mode.
[   10.245500] s5m_rtc_read_time: 2012/1/22 3:4:38(0)
[   10.248836] s3c_rtc_settime() 2012-1-22 3:4:38
[   10.253316] s5m_rtc_set_time: 2012/1/22 3:4:38(0)
[   10.254674] android_work: sent uevent USB_STATE=CONNECTED
[   10.290147] s5m-rtc s5m-rtc: setting system clock to 2012-01-22 03:04:38 UTC (1327201478)
[   10.298034] FIMC0 registered successfully
[   10.301840] FIMC1 registered successfully
[   10.305819] FIMC2 registered successfully
[   10.309766] FIMC3 registered successfully
[   10.313437] **********************************************
[   10.318388] Carson aigs read server gpio con value start
[   10.323866] read GPK2CON_PA :0x2222122
[   10.327385] read GPZCON_PA  :0x111
[   10.330777] read GPD0CON_PA :0x2222
[   10.334204] read GPD0DAT_PA :0x0
[   10.337442] read GPK3CON_PA :0x1100000
[   10.341173] read GPK3DAT_PA :0x0
[   10.344359] read GPX2DAT_PA :0x8d
[   10.347682] **********************************************
[   10.353181] Carson aigs read input gpio con value start
[   10.358444] read GPK2CON :0x2222122
[   10.361838] read GPC0CON :0x10110
[   10.365131] read GPX0CON :0x100f1011
[   10.368664] read GPF0CON :0x22222222
[   10.370137] usb 1-3: new high speed USB device number 2 using s5p-ehci
[   10.378803] read GPBCON  :0x10000
[   10.382059] Carson aigs read magnetic gpio con value start
[   10.387695] read GPA0CON_PA :0x22222222
[   10.391350] read GPBCON_PA :0x10000
[   10.394790] read GPC1CON_PA :0x101
[   10.398204] read GPD1CON_PA :0x2200
[   10.401675] read GPF1CON_PA :0x22222222
[   10.405492] read GPF2CON_PA :0x22222222
[   10.409285] read GPF3CON_PA :0x2222
[   10.412782] read GPJ0CON_PA :0x22222222
[   10.416602] read GPJ1CON_PA :0x22222
[   10.420284] read GPK2CON_PA :0x2222122
[   10.423881] read GPM4CON_PA :0x11111100
[   10.427733] read GPX2CON_PA :0x11100000
[   10.431575] read GPX3CON_PA :0x3100010
[   10.435338] Carson aigs read other gpio con value start
[   10.440604] read GPK1CON_PA :0x4444011
[   10.444188] read GPL0CON_PA :0x10100
[   10.447842] read GPL2CON_PA :0x1111
[   10.451259] read GPX0CON_PA :0x100f1011
[   10.455074] read GPZCON_PA  :0x111
[   10.458489] read GPD0CON_PA :0x2222
[   10.461935] read GPF0CON_PA :0x22222222
[   10.465751] read GPL1CON_PA :0x1
[   10.468925] S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
[   10.505622] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1a0
[   10.512311] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   10.530048] usb 1-3: New USB device Class: Class=9, SubClass=0, Protocol=2
[   10.541142] hub 1-3:1.0: USB hub found
[   10.543571] hub 1-3:1.0: 3 ports detected
[   10.576454] Freeing init memory: 220K
[   10.830206] usb 1-3.1: new high speed USB device number 3 using s5p-ehci
[   10.945688] usb 1-3.1: New USB device found, idVendor=2085, idProduct=f37e, bcdDevice=0004
[   10.952495] usb 1-3.1: New USB device strings: Mfr=1, Product=1, SerialNumber=0
[   10.959787] usb 1-3.1: New USB device Class: Class=239, SubClass=2, Protocol=1
[   10.966985] usb 1-3.1: Product: USB 2.0 PC Cam2
[   10.971496] usb 1-3.1: Manufacturer: USB 2.0 PC Cam2
[   10.977757] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam2 (2085:f37e)
[   11.035704] init: init.connectivity.rc: 87: invalid command 'chowm'
[   11.040752] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[   11.100032] init: /dev/hw_random not found
[   11.116186] input: USB 2.0 PC Cam2 as /devices/platform/s5p-ehci/usb1/1-3/1-3.1/1-3.1:1.0/input/input2
[   11.126000] android_work: sent uevent USB_STATE=DISCONNECTED
[   11.244346] EXT4-fs (mmcblk0p2): recovery complete
[   11.249933] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   11.385910] MFC F/W loaded successfully (size: 360104)
[   11.724148] EXT4-fs (mmcblk0p3): 1 orphan inode deleted
[   11.727920] EXT4-fs (mmcblk0p3): recovery complete

leani

leani 发表于 2019-4-1 09:33
您好，我的设备大部分时候运行没有问题，但是偶尔会出现卡在开机logo界面的情况，我在下面贴出打印日志。 ...

[   11.765106] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[   13.994703] CPU1: shutdown
[   14.030222] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p3
[   14.104912] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[   14.108262] e2fsck: /dev/block/mmcblk0p3: clean, 764/131616 files, 54945/263088 blocks
[   14.136467] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc
[   14.186235] EXT4-fs (mmcblk0p4): recovery complete
[   14.192375] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[   14.335213] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p4
[   14.378541] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[   14.381849] e2fsck: /dev/block/mmcblk0p4: clean, 12/78432 files, 6608/78366 blocks
[   14.410301] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit
[   14.423508] CPU2: shutdown
[   14.423703] GPS DEBUGevice Opened Success!
[   14.423763] GPS DEBUGevice Closed Success!
[   14.425321] adc opened
[   14.425373] adc closed
[   14.425440] buzzer opened success
[   14.425484] buzzer closed success
[   14.425550] ad7663 opened success
[   14.425592] ad7663 closed success
[   14.425656] ad7654 opened success
[   14.425697] ad7654 closed success
[   14.425759] motor ic opened success
[   14.425800] motor ic closed success
[   14.425864] cpld opened success
[   14.425903] cpld closed success
[   14.425967] Client Outputs opened success
[   14.426009] Client Outputs closed success
[   14.426071] Client pwm opened success
[   14.426113] Client pwm closed success
[   14.426176] Client_inputs opened success
[   14.426217] Client_inputs closed success
[   14.426447] MAX485_CTL DEBUGevice Opened Success!
[   14.426497] MAX485_CTL DEBUGevice Closed Success!
[   24.520055] mmc0: Timeout waiting for hardware interrupt.
[   24.525513] ------------[ cut here ]------------
[   24.528719] WARNING: at drivers/mmc/host/mshci.c:799 mshci_send_command+0x69c/0x6dc()
[   24.536491] Modules linked in:
[   24.539528] Backtrace:
[   24.542032] [<c004ae70>] (dump_backtrace+0x0/0x11c) from [<c05bb14c>] (dump_stack+0x18/0x1c)
[   24.550385]  r6:c08b747c r5:0000031f r4:00000000 r3:d2076000
[   24.556074] [<c05bb134>] (dump_stack+0x0/0x1c) from [<c00810d4>] (warn_slowpath_common+0x5c/0x6c)
[   24.564919] [<c0081078>] (warn_slowpath_common+0x0/0x6c) from [<c0081108>] (warn_slowpath_null+0x24/0x2c)
[   24.574427]  r8:d20153d4 r7:00000002 r6:d2299e5c r5:d2299e8c r4:d2015320
[   24.580935] r3:00000009
[   24.583576] [<c00810e4>] (warn_slowpath_null+0x0/0x2c) from [<c03d62d0>] (mshci_send_command+0x69c/0x6dc)
[   24.593120] [<c03d5c34>] (mshci_send_command+0x0/0x6dc) from [<c03d6a60>] (mshci_finish_data+0x64/0x1cc)
[   24.602578] [<c03d69fc>] (mshci_finish_data+0x0/0x1cc) from [<c03d6fa0>] (mshci_timeout_timer+0x7c/0xc8)
[   24.612012]  r7:c08fc080 r6:600f0153 r5:d2015340 r4:d2015320
[   24.617697] [<c03d6f24>] (mshci_timeout_timer+0x0/0xc8) from [<c0090abc>] (run_timer_softirq+0x16c/0x3b4)
[   24.627202]  r6:d2076000 r5:d2064000 r4:d2077e30 r3:c03d6f24
[   24.632877] [<c0090950>] (run_timer_softirq+0x0/0x3b4) from [<c0088f90>] (__do_softirq+0xd0/0x288)
[   24.641812] [<c0088ec0>] (__do_softirq+0x0/0x288) from [<c00893e8>] (irq_exit+0xb4/0xb8)
[   24.649889] [<c0089334>] (irq_exit+0x0/0xb8) from [<c004c248>] (ipi_timer+0x48/0x4c)
[   24.657582]  r4:c003d040 r3:00000001
[   24.661187] [<c004c200>] (ipi_timer+0x0/0x4c) from [<c003f460>] (do_local_timer+0x68/0x84)
[   24.669385]  r6:00000000 r5:c003ddec r4:c090a8f0 r3:c09c3be0
[   24.675061] [<c003f3f8>] (do_local_timer+0x0/0x84) from [<c0046380>] (__irq_svc+0x80/0x14c)
[   24.683367] Exception stack(0xd2077f10 to 0xd2077f58)
[   24.688410] 7f00:                                     d55d1bf3 00000000 2b358561 000b0fbf
[   24.696578] 7f20: c09a10c4 c09a0a24 00000000 c09d41f0 00000003 c099f3fc c12590b8 d2077f7c
[   24.704732] 7f40: 02c3eff5 d2077f58 2a9e08c8 c005ce6c 800f0053 ffffffff
[   24.711310]  r7:00000002 r6:0000001c r5:f881c000 r4:ffffffff
[   24.717001] [<c005ce2c>] (exynos4_enter_idle+0x0/0x17c) from [<c03c2a50>] (cpuidle_idle_call+0xdc/0x264)
[   24.726413]  r5:c09a0a24 r4:c12590a8
[   24.730006] [<c03c2974>] (cpuidle_idle_call+0x0/0x264) from [<c0048240>] (cpu_idle+0xd0/0x104)
[   24.738601] [<c0048170>] (cpu_idle+0x0/0x104) from [<c05b8104>] (secondary_start_kernel+0x17c/0x180)
[   24.747679]  r7:c09a0bd4 r6:d2076000 r5:c090a72c r4:c092c200
[   24.753350] [<c05b7f88>] (secondary_start_kernel+0x0/0x180) from [<405b78d4>] (0x405b78d4)
[   24.761568]  r6:10c0387d r5:00000015 r4:5207806a r3:c05b78bc
[   24.767212] ---[ end trace a3103c8975aae270 ]---
[   34.800048] mmc0: Timeout waiting for hardware interrupt.
[   34.805604] mmcblk0: retrying using single block read
[   44.840047] mmc0: Timeout waiting for hardware interrupt.
[   54.536136] mmc0: Controller never released  data0.
[   54.541201] mmcblk0: error -131 sending status command
[   54.544737] mmcblk0: error -110 transferring data, sector 4260915, nr 8, card status 0x0
[   55.702847] mmc0: Controller never released  data0.
[   56.856545] mmc0: Controller never released  data0.
[   56.861567] mmcblk0: error -131 sending status command
[   56.865142] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0
[   58.023238] mmc0: Controller never released  data0.
[   59.176895] mmc0: Controller never released  data0.
[   59.181919] mmcblk0: error -131 sending status command
[   59.185497] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0
[   60.343569] mmc0: Controller never released  data0.
[   61.497312] mmc0: Controller never released  data0.
[   61.502331] mmcblk0: error -131 sending status command
[   61.505911] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0
[   62.664114] mmc0: Controller never released  data0.
[   63.817734] mmc0: Controller never released  data0.
[   63.822740] mmcblk0: error -131 sending status command
[   63.826319] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0
[   64.984464] mmc0: Controller never released  data0.
[   66.138156] mmc0: Controller never released  data0.
[   66.143171] mmcblk0: error -131 sending status command
[   66.146753] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0
[   67.304820] mmc0: Controller never released  data0.
[   68.458447] mmc0: Controller never released  data0.
[   68.463461] mmcblk0: error -131 sending status command
[   68.467037] mmcblk0: error -131 sending read/write command, response 0x0, card status 0x0

leani

正常日志1：
[    4.621721] mmc0:mshci_set_clock, 50000000@ration:4,11[mjdbg] cmu_set_clock: 50000000
[    4.639455] mmc0: new high speed DDR MMC card at address 0001
[    4.644087] mmcblk0: mmc0:0001 8WPD3R 7.28 GiB
[    4.650380]  mmcblk0: p1 p2 p3 p4
[    4.680060] *******mmc1: inserted!!!!!******
[    4.730075] *******mmc1: inserted!!!!!******
[    4.780087] *******mmc1: inserted!!!!!******
[    4.830127] *******mmc1: inserted!!!!!******
[    4.880068] *******mmc2: inserted!!!!!******
[    4.930074] *******mmc2: inserted!!!!!******
[    4.985087] *******mmc2: inserted!!!!!******
[    5.040128] *******mmc2: inserted!!!!!******
[    9.625050] s3c-i2c s3c2440-i2c.4: timeout waiting for bus idle
[    9.629496] wm8960-codec 4-001a: Failed to issue reset
[    9.634630] wm8960-codec 4-001a: asoc: failed to probe CODEC wm8960-codec.4-001a: -5
[    9.642393] asoc: failed to instantiate card iTOP-4412-Audio: -5
[    9.648370] Samsung SRP driver, (c) 2010 Samsung Electronics
[    9.661905] SRP: Driver successfully probed
[    9.664741] ALSA device list:
[    9.667581]   No soundcards found.
[    9.671042] GACT probability NOT on
[    9.674422] Mirror/redirect action on
[    9.678081] u32 classifier
[    9.680766]     Actions configured
[    9.684141] Netfilter messages via NETLINK v0.30.
[    9.688887] nf_conntrack version 0.5.0 (8566 buckets, 34264 max)
[    9.695569] ctnetlink v0.93: registering with nfnetlink.
[    9.700151] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    9.707066] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    9.713146] xt_time: kernel timezone is -0000
[    9.718564] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.722647] arp_tables: (C) 2002 David S. Miller
[    9.727159] TCP cubic registered
[    9.730330] Initializing XFRM netlink socket
[    9.735490] NET: Registered protocol family 10
[    9.742059] Mobile IPv6
[    9.743047] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.748631] IPv6 over IPv4 tunneling driver
[    9.756887] NET: Registered protocol family 17
[    9.759876] NET: Registered protocol family 15
[    9.764297] can: controller area network core (rev 20090105 abi 8)
[    9.770524] NET: Registered protocol family 29
[    9.774873] can: raw protocol (rev 20090105)
[    9.779223] Bluetooth: RFCOMM TTY layer initialized
[    9.784006] Bluetooth: RFCOMM socket layer initialized
[    9.789119] Bluetooth: RFCOMM ver 1.11
[    9.792851] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.798145] Bluetooth: BNEP filters: protocol multicast
[    9.803372] NET: Registered protocol family 35
[    9.808024] EXYNOS4X12: Adaptive Support Voltage init
[    9.812819] EXYNOS4X12(SG):  ORIG : 5 MOD : 0 RESULT : 5
[    9.818110] EXYNOS4X12(SG):  ORIG : 5 MOD : 0 RESULT : 5
[    9.823408] exynos4x12_set_abb:0x0, 0x0, 0x0, 0x0, 0x8000008e
[    9.829133] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    9.836780] Registering SWP/SWPB emulation handler
[    9.841551] DVFS : VDD_ARM Voltage table set with 5 Group
[    9.846927] exynos4x12_volt_table[0]:1375000
[    9.851179] exynos4x12_volt_table[1]:1350000
[    9.855432] exynos4x12_volt_table[2]:1300000
[    9.859675] exynos4x12_volt_table[3]:1275000
[    9.863939] exynos4x12_volt_table[4]:1212500
[    9.868192] exynos4x12_volt_table[5]:1175000
[    9.872445] exynos4x12_volt_table[6]:1162500
[    9.876698] exynos4x12_volt_table[7]:1162500
[    9.880951] exynos4x12_volt_table[8]:1062500
[    9.885209] exynos4x12_volt_table[9]:1037500
[    9.889447] exynos4x12_volt_table[10]:1025000
[    9.893799] exynos4x12_volt_table[11]:1000000
[    9.898138] exynos4x12_volt_table[12]:987500
[    9.902391] exynos4x12_volt_table[13]:975000
[    9.906644] exynos4x12_cpufreq_init:topeet scp
[    9.911434] [ 302612 ] Memory Type Undertermined.
[    9.915766] DVFS : VDD_INT Voltage table set with 5 Group
[    9.965175] exynos4_integrated_dvfs_hotplug_init, max(1400000),min(200000)
[    9.974067] regulator_init_complete: VDD18_MIPI: incomplete constraints, leaving on
[    9.980695] regulator_init_complete: VDD10_MIPI: incomplete constraints, leaving on
[    9.988331] regulator_init_complete: VDD18_2M: incomplete constraints, leaving on
[    9.997090] regulator_init_complete: vdd_int range: incomplete constraints, leaving on
[   10.003972] regulator_init_complete: vdd_arm range: incomplete constraints, leaving on
[   10.011872] regulator_init_complete: vdd_mif range: incomplete constraints, leaving on
[   10.019624] USB_DEVICE_ATTACHED
[   10.023939] exynos_usb_Device: Exynos USB Device Driver
[   10.027713] <<-GTP-INFO->> GTP driver installing...
[   10.032682] <<-GTP-INFO->> GTP Driver Version: V2.2<2014/01/14>
[   10.038476] <<-GTP-INFO->> GTP Driver Built@05:15:32, Jan  3 2019                                                                                                                  
[   10.044548] <<-GTP-INFO->> GTP I2C Address: 0x5d
[   10.049162] <<-GTP-INFO->> Guitar reset
[   10.156782] <<-GTP-INFO->> IC Version: 911_1060
[   10.161049] <<-GTP-INFO->> CTP_CONFIG_GROUP1 used, config length: 186
[   10.167618] <<-GTP-INFO->> Driver send config.
[   10.195600] <<-GTP-INFO->> X_MAX: 800, Y_MAX: 1280, TRIGGER: 0x00
[   10.215129] <<-GTP-INFO->> create proc entry gt9xx_config success
[   10.220624] input: goodix-ts as /devices/virtual/input/input1
[   10.226327] <<-GTP-INFO->> GTP works in interrupt mode.
[   10.232480] s5m_rtc_read_time: 2012/1/22 3:20:25(0)
[   10.235981] s3c_rtc_settime() 2012-1-22 3:20:25
[   10.240486] s5m_rtc_set_time: 2012/1/22 3:20:25(0)                                                                                                               
[   10.270196] s5m-rtc s5m-rtc: setting system clock to 2012-01-22 03:20:25 UTC (1327202425)
[   10.278022] FIMC0 registered successfully
[   10.281839] FIMC1 registered successfully
[   10.285853] FIMC2 registered successfully
[   10.289766] FIMC3 registered successfully
[   10.293482] **********************************************
[   10.298400] Carson aigs read server gpio con value start
[   10.303787] read GPK2CON_PA :0x2222122
[   10.307425] read GPZCON_PA  :0x111
[   10.310841] read GPD0CON_PA :0x2222
[   10.314250] read GPD0DAT_PA :0x0
[   10.317488] read GPK3CON_PA :0x1100000
[   10.321342] read GPK3DAT_PA :0x0
[   10.324407] read GPX2DAT_PA :0x8d
[   10.327735] **********************************************
[   10.333198] Carson aigs read input gpio con value start
[   10.338471] read GPK2CON :0x2222122
[   10.341883] read GPC0CON :0x10110
[   10.345179] read GPX0CON :0x100f1011
[   10.348710] read GPF0CON :0x22222222                                                                                                                                                 
[   10.352296] read GPBCON  :0x10000
[   10.355591] Carson aigs read magnetic gpio con value start
[   10.361209] read GPA0CON_PA :0x22222222
[   10.364855] read GPBCON_PA :0x10000
[   10.365106] usb 1-3: new high speed USB device number 2 using s5p-ehci
[   10.374980] read GPC1CON_PA :0x101
[   10.378256] read GPD1CON_PA :0x2200
[   10.381730] read GPF1CON_PA :0x22222222
[   10.385554] read GPF2CON_PA :0x22222222
[   10.389332] read GPF3CON_PA :0x2222
[   10.392833] read GPJ0CON_PA :0x22222222
[   10.396649] read GPJ1CON_PA :0x22222
[   10.400208] read GPK2CON_PA :0x2222122
[   10.403915] read GPM4CON_PA :0x11111100
[   10.407773] read GPX2CON_PA :0x11100000
[   10.411580] read GPX3CON_PA :0x3100010
[   10.415309] Carson aigs read other gpio con value start
[   10.420746] read GPK1CON_PA :0x4444011
[   10.424240] read GPL0CON_PA :0x10100
[   10.427862] read GPL2CON_PA :0x1111
[   10.431356] read GPX0CON_PA :0x100f1011
[   10.435122] read GPZCON_PA  :0x111
[   10.438474] read GPD0CON_PA :0x2222
[   10.441969] read GPF0CON_PA :0x22222222
[   10.445842] read GPL1CON_PA :0x1
[   10.448973] S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
[   10.500534] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1a0
[   10.507275] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   10.514339] usb 1-3: New USB device Class: Class=9, SubClass=0, Protocol=2
[   10.540376] hub 1-3:1.0: USB hub found
[   10.542821] hub 1-3:1.0: 3 ports detected
[   10.549422] Freeing init memory: 220K
[   10.830240] usb 1-3.1: new high speed USB device number 3 using s5p-ehci
[   10.945595] usb 1-3.1: New USB device found, idVendor=2085, idProduct=f37e, bcdDevice=0004
[   10.952398] usb 1-3.1: New USB device strings: Mfr=1, Product=1, SerialNumber=0
[   10.959695] usb 1-3.1: New USB device Class: Class=239, SubClass=2, Protocol=1
[   10.966890] usb 1-3.1: Product: USB 2.0 PC Cam2
[   10.971402] usb 1-3.1: Manufacturer: USB 2.0 PC Cam2
[   10.977659] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam2 (2085:f37e)
[   11.011367] init: init.connectivity.rc: 87: invalid command 'chowm'
[   11.016417] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[   11.085912] init: /dev/hw_random not found
[   11.116157] input: USB 2.0 PC Cam2 as /devices/platform/s5p-ehci/usb1/1-3/1-3.1/1-3.1:1.0/input/input2                                                                                                                          
[   11.284823] EXT4-fs (mmcblk0p2): recovery complete
[   11.290501] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   11.361928] MFC F/W loaded successfully (size: 360104)                                                                                                                  
[   11.517402] EXT4-fs (mmcblk0p3): recovery complete

leani

正常日志续：
[   11.522972] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro                         
[   11.590076] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p3
[   11.643457] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[   11.646743] e2fsck: /dev/block/mmcblk0p3: clean, 777/131616 files, 54962/263088 blocks
[   11.673180] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc
[   11.718385] EXT4-fs (mmcblk0p4): recovery complete
[   11.724320] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[   12.344556] CPU1: shutdown
[   12.385207] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p4
[   12.427959] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[   12.431264] e2fsck: /dev/block/mmcblk0p4: clean, 12/78432 files, 6608/78366 blocks
[   12.457961] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit                         
[   12.468103] GPS DEBUGevice Opened Success!
[   12.471070] GPS DEBUGevice Closed Success!
[   12.476889] adc opened
[   12.477819] adc closed
[   12.480247] buzzer opened success
[   12.483461] buzzer closed success
[   12.486836] ad7663 opened success
[   12.490369] ad7663 closed success
[   12.493384] ad7654 opened success
[   12.496700] ad7654 closed success
[   12.499980] motor ic opened success
[   12.503470] motor ic closed success
[   12.506963] cpld opened success
[   12.510065] cpld closed success
[   12.513178] Client Outputs opened success
[   12.517182] Client Outputs closed success
[   12.521421] Client pwm opened success
[   12.524804] Client pwm closed success
[   12.528626] Client_inputs opened success
[   12.532487] Client_inputs closed success
[   12.536543] MAX485_CTL DEBUGevice Opened Success!
[   12.541399] MAX485_CTL DEBUGevice Closed Success!
[   12.703222] [HIF-SDIO][I]hif_sdio_init:start!
[   12.710520] [HIF-SDIO][I]hif_sdio_init:sdio_register_driver() ret=0
[   12.715621] [HIF-SDIO][I]hifsdiod_start:succeed
[   12.719898] [HIF-SDIO][I]hif_sdio_create_dev_node:register_chrdev succeed, mtk_jajor = 248
[   12.728584] [HIF-SDIO][I]hif_sdio_create_dev_node:device_create succeed
[   12.793372] mtk_stp_wmt: Unknown symbol mt_combo_plt_exit_deep_idle (err 0)
[   12.798990] mtk_stp_wmt: Unknown symbol mtk_wcn_cmb_stub_reg (err 0)
[   12.805298] mtk_stp_wmt: Unknown symbol setup_mt6620_wlan_power_for_onoff (err 0)
[   12.812701] mtk_stp_wmt: Unknown symbol mt_combo_plt_enter_deep_idle (err 0)
[   12.819755] mtk_stp_wmt: Unknown symbol mtk_wcn_cmb_stub_unreg (err 0)
[   12.833167] mtk_stp_uart: Unknown symbol mtk_wcn_stp_register_if_tx (err 0)
[   12.838725] mtk_stp_uart: Unknown symbol mtk_wcn_stp_parser_data (err 0)
[   12.850563] mtk_stp_bt: Unknown symbol mtk_wcn_wmt_msgcb_unreg (err 0)
[   12.855699] mtk_stp_bt: Unknown symbol mtk_wcn_stp_is_rxqueue_empty (err 0)
[   12.862611] mtk_stp_bt: Unknown symbol mtk_wcn_stp_send_data (err 0)
[   12.868956] mtk_stp_bt: Unknown symbol mtk_wcn_wmt_hwver_get (err 0)
[   12.875281] mtk_stp_bt: Unknown symbol mtk_wcn_wmt_func_off (err 0)
[   12.881543] mtk_stp_bt: Unknown symbol mtk_wcn_stp_set_bluez (err 0)
[   12.887864] mtk_stp_bt: Unknown symbol mtk_wcn_wmt_func_on (err 0)
[   12.894025] mtk_stp_bt: Unknown symbol mtk_wcn_stp_receive_data (err 0)
[   12.900636] mtk_stp_bt: Unknown symbol mtk_wcn_stp_register_event_cb (err 0)
[   12.907660] mtk_stp_bt: Unknown symbol mtk_wcn_wmt_msgcb_reg (err 0)
[   12.914003] mtk_stp_bt: Unknown symbol mtk_wcn_wmt_assert (err 0)
[   12.920076] mtk_stp_bt: Unknown symbol mtk_wcn_stp_is_ready (err 0)
[   12.935720] mtk_wmt_wifi: Unknown symbol mtk_wcn_wmt_func_off (err 0)
[   12.940788] mtk_wmt_wifi: Unknown symbol mtk_wcn_wmt_func_on (err 0)
[   13.289791] wlan_mt6620: Unknown symbol mtk_wcn_wmt_msgcb_unreg (err 0)
[   13.295039] wlan_mt6620: Unknown symbol mtk_wcn_wmt_hwver_get (err 0)
[   13.301400] wlan_mt6620: Unknown symbol register_set_p2p_mode_handler (err 0)
[   13.308497] wlan_mt6620: Unknown symbol mtk_wcn_wmt_func_on (err 0)
[   13.314760] wlan_mt6620: Unknown symbol PowerOnIFname (err 0)
[   13.320487] wlan_mt6620: Unknown symbol power_state (err 0)
[   13.326020] wlan_mt6620: Unknown symbol mtk_wcn_wmt_msgcb_reg (err 0)
[   13.332482] wlan_mt6620: Unknown symbol pf_set_p2p_mode (err 0)
[   13.338375] wlan_mt6620: Unknown symbol wlan_mode (err 0)
[   13.348927] init: /dev/hw_random not found
[   13.365810] healthd: wakealarm_init: timerfd_create failed
[   13.370066] healthd: No charger supplies found
[   13.374255] healthd: BatteryStatusPath not found
[   13.378872] healthd: BatteryHealthPath not found
[   13.383472] healthd: BatteryPresentPath not found
[   13.388160] healthd: BatteryCapacityPath not found
[   13.392938] healthd: BatteryVoltagePath not found
[   13.397645] healthd: BatteryTemperaturePath not found
[   13.402853] healthd: BatteryTechnologyPath not found
[   13.408006] binder: 1230:1230 transaction failed 29189, size 0-0
[   13.411665] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[   13.413094] init: cannot find '/system/bin/myinit.sh', disabling 'myinit'
[   13.413257] init: cannot find '/system/bin/mtk_agpsd', disabling 'agpsd'
[   13.413276] init: cannot find '/system/bin/hald', disabling 'hald'
[   13.417401] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[   13.417411] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[   13.418283] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[   13.418292] init: powerctl: cannot expand '${sys.powerctl}'
[   13.419704] mtp_bind_config(): mtp
[   13.419725] adb_bind_config
[   13.479540] adb_open
[   13.481539] ADB open:
shell@smdk4x12:/ $ [   13.953381] warning: `rild' uses 32-bit capabilities (legacy support in use)
[   14.015422] s3c-fimc3: FIMC3 1 opened.
[   14.222496] s3cfb s3cfb.0: [fb1] dma: 0x693ac000, cpu: 0xf1aff000, size: 0x00bb8000
[   14.240795] s3c-fimc3: FIMC3 2 opened.
[   14.349939] s3c-fimc0: FIMC0 1 opened.
[   14.353400] s3c-fimc0: FIMC0 0 released.
[   21.421381] healthd: battery l=0 v=0 t=0.0 h=1 st=1 chg=
[   21.432266] request_suspend_state: wakeup (3->0) at 21432255680 (2012-01-22 03:20:36.657189340 UTC)
[   21.898849] acc_open
[   21.899618] acc_release
[   25.534456] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit
[   27.443694] adc opened
[   27.444674] ad7654 opened success
[   27.447909] Client_inputs opened success
[   27.452408] ad7663 opened success
[   27.458968] cpld opened success
[   27.461064] buzzer opened success
[   27.464044] motor ic opened success
[   27.467691] MAX485_CTL DEBUGevice Opened Success!
[   27.480409] Client pwm opened success
[   27.482653] Client Outputs opened success
[   29.995131] init: untracked pid 2390 exited
[   35.528938] CPU2: shutdown