|
|
发表于 2017-6-23 11:41:03
12836 浏览 1 回复
iToop4412精英POP开发板，烧写程序无限在从uboot到引导kernel循环
Checking Boot Mode ... EMMC4.41
SYSTEM ENTER NORMAL BOOT MODE
Hit any key to stop autoboot: 0
reading kernel.. 1120, 12288
MMC read: dev # 0, block # 1120, count 12288 ...12288 blocks read: OK
completed
reading RFS.. 13408, 2048
MMC read: dev # 0, block # 13408, count 2048 ...2048 blocks read: OK
completed
Boot with zImage
Wrong Ramdisk Image Format
[err] boot_get_ramdisk
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
烧写步骤按照开发板手册进行，烧写的是QT系统，烧写方式OTG。。出现上述信息，而且无限循环，引导内核失败。
还有个现象，如果不接7寸的液晶屏就会引导内核成功，接了之后就会出现上述情况。。。请问怎么回事，谢谢~~~
|
|
|
|
|
|
|
|
|
|
登录或注册
扫一扫关注迅为公众号
|
