| 
 | 
 
 
发表于 2016-1-9 20:41:45
 26591 浏览  8 回复
                                 
 
 
iTop4412_Kernel_3.0目录下make编译生成的zImage不能使用
                                
 
每次在iTop4412_Kernel_3.0目录下使用make命令进行编译的生成zImage文件烧写到开发板,重启开发板,超级终端的时候一直出现5秒倒计时死循环,然后把ramdisk-uboot.img用android目录下的替换后,不死循环了,却又出现如下图的问题,怎么解决? 
[    4.670444] dm962x: ethernet MAC address 00:00:ff:ff:00:00 (chip) 
[    4.676554] dm962x: 9620 Mode = 128 
[    4.681047] init: cannot find '/system/bin/6620_launcher', disabling '6620_launcher' 
[    4.690248] init: cannot find '/system/bin/servicemanager', disabling 'servicemanager' 
[    4.695921] dm9620 1-3.2:1.0: eth0: register 'dm9620' at usb-s5p-ehci-3.2, Davicom DM9620 USB Ethernet, 00:00:ff:ff:00:00 
[    4.707725] init: cannot find '/system/bin/vold', disabling 'vold' 
[    4.713861] init: cannot find '/system/bin/netd', disabling 'netd' 
[    4.720041] init: cannot find '/system/bin/debuggerd', disabling 'debuggerd' 
[    4.727037] init: cannot find '/system/bin/rild', disabling 'ril-daemon' 
[    4.733719] init: cannot find '/system/bin/surfaceflinger', disabling 'surfaceflinger' 
[    4.741619] init: cannot find '/system/bin/app_process', disabling 'zygote' 
[    4.748562] init: cannot find '/system/bin/drmserver', disabling 'drm' 
[    4.755082] init: cannot find '/system/bin/mediaserver', disabling 'media' 
[    4.761931] init: cannot find '/system/bin/dbus-daemon', disabling 'dbus' 
[    4.768710] init: cannot find '/system/bin/installd', disabling 'installd' 
[    4.777250] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' 
[    4.784185] init: cannot find '/system/bin/keystore', disabling 'keystore' 
[    4.791037] init: cannot find '/system/bin/hald', disabling 'hald' 
[    4.797215] init: cannot find '/system/bin/cfg_audio', disabling 'cfg_audio' 
[    4.804223] init: property (null) has no value for writing to /sys/class/android_usb/android0/iManufacturer 
[    4.813936] init: property (null) has no value for writing to /sys/class/android_usb/android0/iProduct 
[    4.824273] android_work: did not send uevent (0 0   (null)) 
[    4.829175] adb_bind_config 
[    4.831962] init: cannot execve('/system/bin/sh'): No such file or directory 
[    4.836322] adb_open 
[    4.836334] ADB open: 
[    4.837718] android_work: did not send uevent (0 0   (null)) 
[    4.982639] android_work: sent uevent USB_STATE=CONNECTED 
[    5.053883] android_usb gadget: high speed config #1: android 
[    5.058968] android_work: sent uevent USB_STATE=CONFIGURED 
[    5.545192] CPU1: shutdown 
[    6.479156] CPU2: shutdown 
[    9.863311] init: cannot execve('/system/bin/sh'): No such file or directory 
[   11.721728] CPU3: shutdown 
[   14.883931] init: cannot execve('/system/bin/sh'): No such file or directory 
[   19.903627] init: cannot execve('/system/bin/sh'): No such file or directory 
[   24.923621] init: cannot execve('/system/bin/sh'): No such file or directory 
[   29.943586] init: cannot execve('/system/bin/sh'): No such file or directory 
[   34.962987] init: cannot execve('/system/bin/sh'): No such file or directory 
 
 |   
 
 
 
 |  
| 
 | 
 
 
 | 
 | 
 
| 
 | 
 | 
 
 
| 
 | 
 
 
发表于 2016-5-7 17:17:29
                                 
 
 
| 
我也遇到同样问题,先去吧初始化配置文件用官方的替代一下 |   
 
 
 
 |  
| 
 | 
 
 
 | 
 | 
 
| 
 | 
 | 
 
 
| 
 | 
你这个是不是运行的最小系统? 
先用我们提供的最小系统测试,然后再对比你自己的,测试出是不是zImage的问题 
 
看打印信息,应该是你制作的最小系统有问题。 
好好检查那几个初始化配置文件,不行就用我们提供的那几个文件测试 
注意不要在window下打开那个几个问题,直接网盘下载然后拷贝到Ubuntu系统下,因为windows会将文件格式给转化,重新导致你这个问题出现。 |   
 
 
 
 |  
| 
 | 
 
 
 | 
 | 
 
| 
 | 
 | 
 
 
| 
 | 
 
 
发表于 2016-5-31 22:57:27
                                 
 
 
按楼上的操作试了,用迅为提供的最小系统,还是同样的情况 
 |   
 
 
 
 |  
| 
 | 
 
 
 | 
 | 
 
| 
 | 
 | 
 
 
| 
 | 
 
 
发表于 2016-6-24 23:10:11
                                 
 
 
| 
你的ramdisk、system.img、zImage是不是配套的?用最小系统的ramdisk陪android的zImage估计会出错。 |   
 
 
 
 |  
| 
 | 
 
 
 | 
 | 
 
| 
 | 
 | 
 
 
| 
 | 
 
 楼主|
发表于 2016-7-1 17:44:03
                                 
 
 
 |  
| 
 | 
 
 
 | 
 | 
 
| 
 | 
 | 
 
 
| 
 | 
 
 
发表于 2016-8-30 14:22:16
                                 
 
 
 |  
| 
 | 
 
 
 | 
 | 
 
| 
 | 
 | 
 
 
| 
 | 
 
 
发表于 2016-9-10 13:35:10
                                 
 
 
| 
是不是编译的zImage是Android用的,而网盘的最小系统的system是qt的,所以不能用,要zImage,ramdisk,system都要为区分清楚,qt与Android,个人也遇到过这情款 |   
 
 
 
 |  
| 
 | 
 
 
 | 
 | 
 
| 
 | 
 | 
 
 
| 
 | 
记得更新高版本的手册~ 
不是make编译,是make zImage命令 |   
 
 
 
 |  
| 
 | 
 
 
 | 
 | 
 
| 
 | 
 | 
 
 
 
	
登录或注册 
扫一扫关注迅为公众号
  
                 
   
 
 |