|
|
发表于 2015-4-24 08:00:15
19871 浏览 3 回复
求助，烧写ubunt失败
步骤是按照手册4.4来的，卡是16G10速卡，下面是终端输出的内容，
此分区是按照2.5G 300M 300M 分的，按照1.7G 50M 50M结果也是一样的
iTOP-4412 # fdisk -p 1
partion # size(MB) block start # block count partition_Id
1 11961 6381568 24496128 0x0C
2 2500 32768 5120000 0x83
3 300 5152768 614400 0x83
4 300 5767168 614400 0x83
iTOP-4412 # sdfuse flash bootloader u-boot-iTOP-4412.bin
SD sclk_mmc is 400K HZ
SD sclk_mmc is 50000K HZ
SD sclk_mmc is 50000K HZ
[Fusing Image from SD Card.]
[Partition table on MoviNAND]
ptn 0 name='bootloader' start=0x0 len=N/A (use hard-coded info. (cmd: movi))
ptn 1 name='kernel' start=N/A len=N/A (use hard-coded info. (cmd: movi))
ptn 2 name='ramdisk' start=N/A len=0x300000(~3072KB) (use hard-coded info. (cmd: movi))
ptn 3 name='Recovery' start=N/A len=0x600000(~6144KB) (use hard-coded info. (cmd: movi))
ptn 4 name='system' start=0x1000000 len=0x6A400000(~1740800KB)
ptn 5 name='userdata' start=0x6B400000 len=0x12C00000(~307200KB)
ptn 6 name='cache' start=0x7E000000 len=0x12C00000(~307200KB)
ptn 7 name='fat' start=0x90C00000 len=0x12800000(~303104KB)
Partition: bootloader, File: /sdupdate/u-boot-iTOP-4412.bin
Partition1: Start Address(0x616000), Size(0x175c800)
reading /sdupdate/u-boot-iTOP-4412.bin
Failed to read /sdupdate/u-boot-iTOP-4412.bin
iTOP-4412 #
|
|
|
|
|
|
|
|
|
|
|
|
楼主|
发表于 2015-4-24 08:11:40
|
制作u盘文件的时候用的fedora20系统，有关系么，虚拟机的ubuntu12认不出卡 |
|
|
|
|
|
|
|
|
|
|
|
楼主|
发表于 2015-4-24 08:53:37
换了个4G卡烧写也不行，一样的错误 |
|
|
|
|
|
|
|
|
|
|
|
楼主|
发表于 2015-4-24 11:09:05
|
解决，手册上没写要把那三个文件放到fat分区，哎。。。。。。 |
|
|
|
|
|
|
|
|
|
登录或注册
扫一扫关注迅为公众号
|
