SCP 1G版本，烧录android 4.4系统，kernel 编译no_wifi,设备不停地重启

15132123

SCP 1G版本，烧录android 4.4系统，kernel 编译no_wifi,设备不停地重启（使用云盘里面的android4.4镜像也是不停地重启，QT版本的可以正常运行。前面发的一篇帖子没有解决掉问题，希望指导一下，看看是哪里出错了。）

[    5.345041] usb 1-3: new high speed USB device number 2 using s5p-ehci
[    5.480421] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1a0
[    5.487050] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.494169] usb 1-3: New USB device Class: Class=9, SubClass=0, Protocol=2
[    5.501573] hub 1-3:1.0: USB hub found
[    5.504905] hub 1-3:1.0: 3 ports detected
[    5.560256] input: ft5x0x_ts as /devices/virtual/input/input2
[    5.570701] ft5x0x_ts 3-0038: Firmware version 0x10
[    5.574113] ft5x0x_ts 3-0038: FocalTech ft5x0x TouchScreen initialized
[    5.581177] input: ft5x0x_ts as /devices/virtual/input/input3
[    5.595213] read reg (0xa6) error, -6
[    5.597409] ft5x0x_ts 7-0038: chip not found
[    5.665513] ft5x0x_ts 7-0038: probe ft5x0x TouchScreen failed, -6
[    5.670413] <<-GTP-INFO->> GTP driver installing...
[    5.675302] <<-GTP-INFO->> GTP Driver Version: V2.2<2014/01/14>
[    5.680939] <<-GTP-INFO->> GTP Driver Built@04:20:02, Sep  9 2021
[    5.687007] <<-GTP-INFO->> GTP I2C Address: 0x5d
[    5.691622] <<-GTP-INFO->> Guitar reset
[    5.790299] usb 1-3.1: new high speed USB device number 3 using s5p-ehci
[    5.800844] <<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -6!
[    5.807174] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -6! Process reset.
[    5.814600] <<-GTP-INFO->> Guitar reset
[    5.902139] usb 1-3.1: New USB device found, idVendor=2717, idProduct=4106, bcdDevice=0000
[    5.909014] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.916387] usb 1-3.1: New USB device Class: Class=0, SubClass=0, Protocol=0
[    5.923494] usb 1-3.1: Product: MI WLAN Adapter
[    5.927912] usb 1-3.1: Manufacturer: MediaTek
[    5.932249] usb 1-3.1: SerialNumber: 1.0
[    5.936272] <<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -6!
[    5.943036] <<-GTP-ERROR->> GTP i2c test failed time 1.
[    5.976191] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -6! Process reset.
[    5.982991] <<-GTP-INFO->> Guitar reset
[    6.045483] usb 1-3.2: new high speed USB device number 4 using s5p-ehci
[    6.081211] <<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -6!
[    6.086793] <<-GTP-ERROR->> GTP i2c test failed time 2.
[    6.106105] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -6! Process reset.
[    6.112910] <<-GTP-INFO->> Guitar reset
[    6.155893] usb 1-3.2: config 1 interface 0 altsetting 0 endpoint 0x83 has an invalid bInterval 0, changing to 9
[    6.211019] <<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -6!
[    6.216609] <<-GTP-ERROR->> GTP i2c test failed time 3.
[    6.235974] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -6! Process reset.
[    6.242933] <<-GTP-INFO->> Guitar reset
[    6.257965] usb 1-3.2: New USB device found, idVendor=0a46, idProduct=9621, bcdDevice=0101
[    6.264881] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.272249] usb 1-3.2: New USB device Class: Class=0, SubClass=0, Protocol=0
[    6.282600] [dm962] Linux Driver = V2.45
[    6.285359] ++++++[dm962]+++++ dm_read_reg() 0x29 0x0a
[    6.290481] ++++++[dm962]+++++ dm_read_reg() 0x28 0x46
[    6.295608] ++++++[dm962]+++++ dm_read_reg() 0x2b 0x96
[    6.300731] ++++++[dm962]+++++ dm_read_reg() 0x2a 0x21
[    6.305854] ++++++[dm962]+++++ dm_read_reg() 0xF2 0x00
[    6.310733] ++++++[dm962]+++++  [Analysis.2] 0xF2, D[7] 0 OK
[    6.316427] ++++++[dm962]+++++  [Analysis.2] 0xF2, D[6] 0 OK
[    6.322173] ++++++[dm962]+++++  [Analysis.2] 0xF2, D[5] 0 EP1: Empty
[    6.328354] ++++++[dm962]+++++  [Analysis.2] 0xF2, D[3] 0 OK
[    6.333986] ++++++[dm962]+++++  [Analysis.2] 0xF2, D[2] 0 OK
[    6.339625] ++++++[dm962]+++++  [Analysis.2] 0xF2, D[1] 0 OK
[    6.345271] ++++++[dm962]+++++  [Analysis.2] 0xF2, D[0] 0 Status: TX buffer 0 pkts
[    6.354140] <<-GTP-ERROR->> I2C Write: 0x8041, 1 bytes failed, errcode: -6!
[    6.359778] <<-GTP-ERROR->> GTP i2c test failed time 4.
[    6.369606] [dm96] Chk mac addr 00:00:ff:ff:00:00
[    6.372911] [dm96] [00] [00] [ff] [ff] [00] [00]
[    6.377727] [dm96] 9620 tx_fix_mod (DM9_NREV= 2)
[    6.382227] <<-GTP-ERROR->> I2C communication ERROR!
[    6.387226] Goodix-TS: probe of 3-005d failed with error -1
[    6.390108] [dm96] Fixme: work around for 9620 mode
[    6.390138] [dm96] Add tx_fixup() debug...
[    6.402085] [dm96] 9620 Mode = 128
[    6.403614] s5m_rtc_read_time: 2012/1/1 0:0:3(0)
[    6.403659] s3c_rtc_settime() 2012-1-1 0:0:3
[    6.403716] s5m_rtc_set_time: 2012/1/1 0:0:3(0)
[    6.430390] s5m-rtc s5m-rtc: setting system clock to 2012-01-01 00:00:03 UTC (1325376003)
[    6.441316] FIMC0 registered successfully
[    6.446401] FIMC1 registered successfully
[    6.450405] FIMC2 registered successfully
[    6.454291] FIMC3 registered successfully
[    6.457818] S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
[    6.462383] dm9620 1-3.2:1.0: eth0: register 'dm9620' at usb-s5p-ehci-3.2, Davicom DM9620 USB Ethernet, 00:00:ff:ff:00:00
[    6.530687] Freeing init memory: 220K
[    7.029117] init: init.connectivity.rc: 87: invalid command 'chowm'
[    7.034164] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    7.104436] init: /dev/hw_random not found
[    7.216368] EXT4-fs (mmcblk0p2): recovery complete
[    7.219683] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    7.239583] EXT4-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended
[    7.249618] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    7.278169] MFC F/W loaded successfully (size: 360104)
[    7.315055] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p3
[    7.603151] android_work: sent uevent USB_STATE=DISCONNECTED
[    8.291247] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[    8.294441] e2fsck: /dev/block/mmcblk0p3 has been mounted 33 times without being checked, check forced.
[    8.303795] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[    8.309612] e2fsck: Pass 2: Checking directory structure
[    8.314904] e2fsck: Pass 3: Checking directory connectivity
[    8.320453] e2fsck: Pass 4: Checking reference counts
[    8.325487] e2fsck: Pass 5: Checking group summary information
[    8.331303] e2fsck: /dev/block/mmcblk0p3: 11/131616 files (0.0% non-contiguous), 12669/263088 blocks
[    8.402368] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc
[    8.426559] EXT4-fs (mmcblk0p4): recovery complete
[    8.429894] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    9.024889] CPU1: shutdown
[    9.070181] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p4
[    9.111528] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[    9.114783] e2fsck: /dev/block/mmcblk0p4: clean, 11/78432 files, 6607/78366 blocks (check after next mount)
[    9.144144] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit
[    9.154329] GPS DEBUGevice Opened Success!
[    9.157293] GPS DEBUGevice Closed Success!
[    9.163336] MAX485_CTL DEBUGevice Opened Success!
[    9.166856] MAX485_CTL DEBUGevice Closed Success!
[    9.251125] init: /dev/hw_random not found
[    9.345880] healthd: wakealarm_init: timerfd_create failed
[    9.360887] healthd: No charger supplies found
[    9.371861] healthd: BatteryStatusPath not found
[    9.380959] healthd: BatteryHealthPath not found
[    9.385893] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    9.389783] healthd: BatteryPresentPath not found
[    9.389837] healthd: BatteryCapacityPath not found
[    9.389883] healthd: BatteryVoltagePath not found
[    9.389924] healthd: BatteryTemperaturePath not found
[    9.389963] healthd: BatteryTechnologyPath not found
[    9.390203] binder: 1243:1243 transaction failed 29189, size 0-0
[    9.434959] init: cannot find '/system/bin/myinit.sh', disabling 'myinit'
[    9.441531] init: cannot find '/system/bin/mtk_agpsd', disabling 'agpsd'
[    9.447347] init: cannot find '/system/bin/hald', disabling 'hald'
[    9.454628] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    9.461353] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    9.476125] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[    9.489925] init: powerctl: cannot expand '${sys.powerctl}'
[    9.497530] android_work: did not send uevent (0 0   (null))
[    9.502857] mtp_bind_config(): mtp
[    9.522642] adb_bind_config
[    9.537422] adb_open
[    9.538830] ADB open:
[    9.560343] android_work: did not send uevent (0 0   (null))
shell@smdk4x12:/ $ [    9.702732] android_work: sent uevent USB_STATE=CONNECTED
[    9.782790] warning: `rild' uses 32-bit capabilities (legacy support in use)
[    9.826298] s3c-fimc3: FIMC3 1 opened.
[   10.104469] s3cfb s3cfb.0: [fb1] dma: 0x693ac000, cpu: 0xf0b10000, size: 0x00bb8000
[   10.122706] s3c-fimc3: FIMC3 2 opened.
[   10.134627] s3c-fimc0: FIMC0 1 opened.
[   10.136977] s3c-fimc0: FIMC0 0 released.