请选择 进入手机版 | 继续访问电脑版
搜索

15

主题

39

帖子

144

积分

注册会员

Rank: 2

积分
144
发表于 2014-10-24 23:12:40 12420 浏览 3 回复

【uboot】uboot启动C语言主函数start_armboot

uboot启动的主函数 start_armboot 主要工作是初始化硬件资源和搬运linux内核从内核启动或者收到中断后,进入uboot系统中,主函数代码比较复杂。我精简了一下,主要去掉了#ifdef。。。主函数代码如下:

void start_armboot (void)
{
init_fnc_t **init_fnc_ptr;
char *s;
int mmc_exist = 0;
/* Pointer is writable since we allocated a register for it */
gd = (gd_t*)(_armboot_start - CONFIG_SYS_MALLOC_LEN - sizeof(gd_t));
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
memset ((void*)gd, 0, sizeof (gd_t));
gd->bd = (bd_t*)((char*)gd - sizeof(bd_t));
memset (gd->bd, 0, sizeof (bd_t));
// gd->flags |= GD_FLG_RELOC;
monitor_flash_len = _bss_start - _armboot_start;
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr)
{
  if ((*init_fnc_ptr)() != 0)
  {
   hang ();
  }
}

/* armboot_start is defined in the board-specific linker script */
mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN);
puts ("MMC:   ");
mmc_exist = mmc_initialize (gd->bd);
if (mmc_exist != 0)
{
  puts ("0 MB\n");
}
/* initialize environment */
env_relocate ();
/* IP Address */
gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
stdio_init (); /* get the devices list going. */
jumptable_init ();
console_init_r (); /* fully init console as a device */
/* enable exceptions */
enable_interrupts ();

/* Initialize from environment */
if ((s = getenv ("loadaddr")) != NULL)
{
  load_addr = simple_strtoul (s, NULL, 16);
}

board_late_init ();

/*
char tmp_cmd[100];
sprintf(tmp_cmd, "emmc open 0");
run_command(tmp_cmd, 0);
*/   
/* main_loop() can return to retry autoboot, if so just run it again. */
recovery_preboot();
for (;;)
{
  main_loop ();
}
/* NOTREACHED - no way out of command loop except booting */
}
回复

使用道具 举报

15

主题

39

帖子

144

积分

注册会员

Rank: 2

积分
144
 楼主| 发表于 2014-10-24 23:18:07
主函数中for(;;)中的main_loop ();精简后代码如下

/****************************************************************************/

void main_loop (void)
{
        static char lastcommand[CONFIG_SYS_CBSIZE] = { 0, };
        int len;
        int rc = 1;
        int flag;
        char *s;
        int bootdelay;

        s = getenv ("bootdelay");
        bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY;

        debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay);

        s = getenv ("bootcmd");

        debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");

        if (bootdelay >= 0 && s && !abortboot (bootdelay))
        {
                run_command (s, 0);
        }

        /*
         * Main Loop for Monitor Command Processing
         */

        for (;;)
        {
                len = readline (CONFIG_SYS_PROMPT);

                flag = 0;        /* assume no special flags for now */
                if (len > 0)
                        strcpy (lastcommand, console_buffer);
                else if (len == 0)
                        flag |= CMD_FLAG_REPEAT;

                if (len == -1)
                        puts ("<INTERRUPT>\n");
                else
                        rc = run_command (lastcommand, flag);

                if (rc <= 0)
                {
                        /* invalid command or not repeatable, forget it */
                        lastcommand[0] = 0;
                }
        }

}

回复 点赞

使用道具 举报

151

主题

508

帖子

3567

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
3567
发表于 2014-10-25 12:04:10
不错!
回复

使用道具 举报

1

主题

357

帖子

1111

积分

QQ游客

积分
1111
发表于 2014-10-25 12:08:24
总结的很好,不错
回复 点赞

使用道具 举报

返回列表
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

登录或注册

官方客服

QQ:2551456065

官方QQ群

195631883

扫一扫关注迅为公众号

群号652692981

 
快速回复 返回顶部 返回列表