设备树源码编译脚本出错

fuchifuchi

我跟着视频教程步骤操作，到了设备树源码编译脚本的时候出错了。执行脚本   topeet@ubuntu:~/miniLinux/iTop4412_Kernel_3.0/itop4412_kernel_4_14_2_bsp$ ./build_all.sh

输出如下
*** Your GCC is older than 6.0 and will not be supported starting in v2018.01.
  CHK     include/config/uboot.release
  CHK     include/generated/timestamp_autogenerated.h
  UPD     include/generated/timestamp_autogenerated.h
  CHK     include/generated/version_autogenerated.h
  CHK     include/generated/generic-asm-offsets.h
  CHK     include/generated/asm-offsets.h
  HOSTCC  tools/mkenvimage.o
  HOSTCC  tools/image-host.o
  HOSTCC  tools/fit_image.o
  HOSTCC  tools/dumpimage.o
  HOSTCC  tools/mkimage.o
  CHK     include/config.h
  CFG     u-boot.cfg
  HOSTLD  tools/mkenvimage
  HOSTLD  tools/dumpimage
  HOSTLD  tools/mkimage
  CC      cmd/version.o
  CC      common/main.o
  LD      cmd/built-in.o
  LD      common/built-in.o
  CC      drivers/usb/gadget/f_thor.o
  CC      drivers/usb/gadget/f_fastboot.o
drivers/usb/gadget/f_fastboot.c:53: warning: function declaration isn't a prototype
drivers/usb/gadget/f_fastboot.c: In function 'cb_flash':
drivers/usb/gadget/f_fastboot.c:690: warning: assignment from incompatible pointer type
drivers/usb/gadget/f_fastboot.c:680: warning: unused variable 'argv_system'
drivers/usb/gadget/f_fastboot.c:674: warning: unused variable 'argv'
  CC      lib/smbios.o
  CC      lib/efi_loader/helloworld.o
  LD      lib/efi_loader/helloworld_efi.so
  OBJCOPY lib/efi_loader/helloworld.efi
rm lib/efi_loader/helloworld_efi.so lib/efi_loader/helloworld.o
  CC      lib/display_options.o
  LD      drivers/usb/gadget/built-in.o
  LD      lib/built-in.o
  LD      u-boot
  OBJCOPY u-boot.srec
  OBJCOPY u-boot-nodtb.bin
  SYM     u-boot.sym
make[2]: `arch/arm/dts/exynos4412-itop4412.dtb' is up to date.
  CAT     u-boot-dtb.bin
  COPY    u-boot.bin
copy u-boot.bin done.
copying itop4412-spl.bin...
copy u-boot-spl.bin done.
fusing u-boot-iTOP-4412.bin......
build success !!!
#
# configuration written to .config
#
scripts/kconfig/conf  --silentoldconfig Kconfig
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  CHK     scripts/mod/devicetable-offsets.h
  CHK     include/generated/timeconst.h
  CHK     include/generated/bounds.h
  CHK     include/generated/asm-offsets.h
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  CC      init/do_mounts.o
  CC      arch/arm/kernel/signal.o
  CC      arch/arm/vdso/vgettimeofday.o
  AS      arch/arm/vdso/datapage.o
  HOSTCC  arch/arm/vdso/vdsomunge
  CC      arch/arm/kernel/traps.o
/tmp/ccdJFcqd.s: Assembler messages:
/tmp/ccdJFcqd.s:147: Error: garbage following instruction -- `dmb ish'
/tmp/ccdJFcqd.s:207: Error: garbage following instruction -- `dmb ish'
/tmp/ccdJFcqd.s:400: Error: garbage following instruction -- `dmb ish'
/tmp/ccdJFcqd.s:461: Error: garbage following instruction -- `dmb ish'
/tmp/ccdJFcqd.s:491: Error: garbage following instruction -- `dmb ish'
/tmp/ccdJFcqd.s:533: Error: garbage following instruction -- `dmb ish'
/tmp/ccdJFcqd.s:615: Error: garbage following instruction -- `dmb ish'
/tmp/ccdJFcqd.s:656: Error: garbage following instruction -- `dmb ish'
/tmp/ccdJFcqd.s:675: Error: garbage following instruction -- `dmb ish'
/tmp/ccdJFcqd.s:716: Error: garbage following instruction -- `dmb ish'
/tmp/ccdJFcqd.s:731: Error: garbage following instruction -- `dmb ish'
make[1]: *** [arch/arm/vdso/vgettimeofday.o] Error 1
make: *** [arch/arm/vdso] Error 2
make: *** Waiting for unfinished jobs....
  AS      arch/arm/kernel/entry-armv.o
arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:876: Error: garbage following instruction -- `dmb ish'
arch/arm/kernel/entry-armv.S:883: Error: garbage following instruction -- `dmb ish'
arch/arm/kernel/entry-armv.S:940: Error: garbage following instruction -- `dmb ish'
arch/arm/kernel/entry-armv.S:990: Error: garbage following instruction -- `dmb ish'
make[1]: *** [arch/arm/kernel/entry-armv.o] Error 1
make[1]: *** Waiting for unfinished jobs....
/tmp/ccOVfQxa.s: Assembler messages:
/tmp/ccOVfQxa.s:3357: Error: garbage following instruction -- `dmb ish'
make[1]: *** [arch/arm/kernel/signal.o] Error 1
/tmp/ccaAaw2r.s: Assembler messages:
/tmp/ccaAaw2r.s:1972: Error: unknown pseudo-op: `.arch_extension'
/tmp/ccaAaw2r.s:1973: Error: bad instruction `pldw [r3,#0]'
/tmp/ccaAaw2r.s:2003: Error: garbage following instruction -- `dmb ish'
/tmp/ccaAaw2r.s:2133: Error: garbage following instruction -- `dmb ish'
/tmp/ccaAaw2r.s:2144: Error: garbage following instruction -- `dsb ishst'
/tmp/ccaAaw2r.s:2237: Error: unknown pseudo-op: `.arch_extension'
/tmp/ccaAaw2r.s:2238: Error: bad instruction `pldw [ip,#0]'
/tmp/ccaAaw2r.s:2281: Error: garbage following instruction -- `dmb ish'
make[1]: *** [arch/arm/kernel/traps.o] Error 1
make: *** [arch/arm/kernel] Error 2
/tmp/ccgBH3B0.s: Assembler messages:
/tmp/ccgBH3B0.s:916: Error: garbage following instruction -- `dmb ish'
/tmp/ccgBH3B0.s:929: Error: unknown pseudo-op: `.arch_extension'
/tmp/ccgBH3B0.s:930: Error: bad instruction `pldw [r3,#0]'
/tmp/ccgBH3B0.s:957: Error: garbage following instruction -- `dmb ish'
make[1]: *** [init/do_mounts.o] Error 1
make: *** [init] Error 2
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  CHK     include/generated/bounds.h
  CHK     include/generated/timeconst.h
  CHK     include/generated/asm-offsets.h
  CALL    scripts/checksyscalls.sh
  CHK     scripts/mod/devicetable-offsets.h


编译器都设置好的。


请大神们支援一下。

admin

是不是编译器有点老呢，有没有加售后群，在里面问一下呢

qoohauugpj

seo优化seo培训seo专业培训seo技术培训企业站seoseo培训公司
seo培训教程seo系统培训seo优化培训企业网站seoseo网络优化教程
培训seoseo免费培训seo排名培训seo排名优化seo学习seo实战
seo交流免费seo培训seo优化方案seo教学seo如何优化seo优化教程
如何做seo优化seo经验分享sem和seo区别seo基础seo课程seo网络培训
电子商务网站seo网站优化seo培训seo优化课程seo基础教程seo培训服务
seo基础知识关键词seo培训seo技术教程seo视频培训网站seo方法
怎么优化自己网站学习seoseo网站关键词优化seo怎么做seo实战课程
seo培训学院黑帽seo教程网站seo培训seo优化方法企业seo培训

你是否看过不少的seo书籍?你是否每天花大量时间研究网上或某某培训中的视频录像?
你是否报名参加过为数不少的seo培训班?报名其他SEO培训学完课程后还是感觉很迷茫?
想做seo却不知道怎么下手?做seo每天都不知道该怎么开始?每天还在努力的用软件刷假IP假PV或下拉框?
学完课程连怎么开始做seo都不会,还学什么seo?看录像视频都花好几月时间,看完连每天seo怎么做都不知道,你学的是什么seo?
恭喜你,这些症状特征都是没有真正学懂学透seo技术的现实表现!不是你不勤奋,也不是你脑子笨,原因在于这几个字:没人愿意教真东西!
市面上充斥太多的SEO培训,学员参加培训之后,往往只学会了名词解释,根本学不到真正的实战和大神级的日常作技巧和技术!
来加入我们吧,我们强调实战,重视实战,我们毫无保留传授给你seo大神级作技巧和seo技术!我们强调快速而有效,稳定而长久!
在此强调一下,我们对培训多少学员数量不敏感,我们更注重的是质量;还有个事,就是我们自己正以自己的seo方式推广我们的盈利项目...
官方网站seo299.com (免费解答seo问题,免费提供seo优化建议,免费帮选优化关键词)
客服咨询QQ996934(企鹅扣扣)
Email:996934@qq.com
seo培训学习_seo299.com 培训seo教学课程_seo299.com 企业站seo实战培训_seo299.com

2454969798

请问解决了么？我也遇到这个问题