板子开机时经常会卡在这里一分钟多，不管是linux qt 还是Android

1020165558

板子开机时经常会卡在这里一分钟多，不管是linux qt 还是Android，用的是2G的核心板在精英版上。


[    0.000000] Memory: 1653492k/1653492k available, 409868k reserved, 1309696K h
ighmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xfea00000 - 0xffe00000   (  20 MB)
[    0.000000]     vmalloc : 0xee800000 - 0xf6000000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xee000000   ( 736 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .init : 0xc0008000 - 0xc003e000   ( 216 kB)
[    0.000000]       .text : 0xc003e000 - 0xc08c0000   (8712 kB)
[    0.000000]       .data : 0xc08c0000 - 0xc09633e0   ( 653 kB)
[    0.000000]        .bss : 0xc0965a30 - 0xc09a2b90   ( 245 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, N
odes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:456
[    0.000000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
[    0.045000] pid_max: default: 32768 minimum: 301
[    0.045000] Mount-cache hash table entries: 512
[    0.045000] Initializing cgroup subsys debug
[    0.045000] Initializing cgroup subsys cpuacct
[    0.045000] Initializing cgroup subsys freezer
[    0.045000] CPU: Testing write buffer coherency: ok
[    0.045000] **********panic_dump_test****************
[    0.045000] There is no valid panic information in memory
[    0.045000] **************************
[    0.045000] L310 cache controller enabled
[    0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache si
ze: 1048576 B
[    0.075000] CPU1: Booted secondary processor
[    0.095000] CPU2: Booted secondary processor
[    0.115000] CPU3: Booted secondary processor
[    0.115000] Brought up 4 CPUs
[    0.115000] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
[    0.120000] print_constraints: dummy:
[    0.120000] NET: Registered protocol family 16
[    0.135000] exynos4_pmu_init: PMU supports 4412(96)
[    0.135000] EXYNOS4: Initializing architecture
[    0.135000] panic_file create OK !!
[    0.135000] s3c-adc exynos4412-adc: attached adc driver
[    0.135000] samsung-pd samsung-pd.0: power domain registered
[    0.135000] samsung-pd samsung-pd.1: power domain registered
[    0.135000] samsung-pd samsung-pd.2: power domain registered
[    0.135000] samsung-pd samsung-pd.5: power domain registered
[    0.135000] samsung-pd samsung-pd.4: power domain registered
[    0.135000] samsung-pd samsung-pd.6: power domain registered
[    0.135000] samsung-pd samsung-pd.7: power domain registered
[    0.135000] s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, t
in=divclk, base 8
[    0.135000] s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, t
in=divclk, base 0
[    0.135000] UMP: UMP device driver  loaded
[    0.155000] bio: create slab <bio-0> at 0
[    0.155000] SCSI subsystem initialized
[    0.155000] s3c64xx_spi_probe(969)
[    0.155000] s3c64xx_spi_probe(1092)
[    0.155000] s3c64xx_spi_probe(1113)
[    0.155000] usbcore: registered new interface driver usbfs
[    0.155000] usbcore: registered new interface driver hub
[    0.155000] usbcore: registered new device driver usb
[    0.155000] i2c-gpio i2c-gpio.0: using pins 42 (SDA) and 43 (SCL)
[    0.160000] +s5m8767_pmic_probe()
[    0.160000] print_constraints: vdd_mif range: 900 <--> 1100 mV at 1100 mV
[    0.160000] print_constraints: vdd_arm range: 850 <--> 1450 mV at 1200 mV
[    0.160000] print_constraints: vdd_int range: 875 <--> 1200 mV at 1000 mV
[    0.160000] print_constraints: vdd_g3d range: 750 <--> 1500 mV at 1100 mV
[    0.165000] print_constraints: vdd_m12 range: 750 <--> 1500 mV at 1200 mV
[    0.165000] print_constraints: vdd12_5m range: 750 <--> 1500 mV at 1200 mV
[    0.165000] print_constraints: vddf28_emmc range: 750 <--> 3000 mV at 2850 mV

[    0.180000] print_constraints: VDDQ_M12: 1500 mV
[    0.180000] print_constraints: VDD18_2M: 1800 mV
[    0.180000] print_constraints: VDD10_MIPI: 1000 mV
[    0.190000] print_constraints: VDD33_LCD: 3300 mV
[    0.195000] print_constraints: VDD18_MIPI: 1800 mV
[    0.205000] print_constraints: VDD33_UOTG: 3300 mV
[    0.210000] print_constraints: VDD10_USH: 1000 mV
[    0.210000] print_constraints: VDD18_HSIC: 1800 mV
[    0.220000] print_constraints: DC33V_TP: 3300 mV
[    0.220000] print_constraints: VDD28_CAM: 1800 mV
[    0.225000] print_constraints: VDD28_AF: 2800 mV
[    0.225000] print_constraints: VDDA28_2M: 2800 mV
[    0.225000] print_constraints: VDD28_TF: 2800 mV
[    0.230000] print_constraints: VDD33_A31: 2800 mV
[    0.250000] print_constraints: VDD18_CAM: 1800 mV
[    0.250000] print_constraints: VDD18_A31: 1800 mV
[    0.255000] print_constraints: GPS_1V8: 1800 mV
[    0.255000] print_constraints: DVDD12: 1200 mV
[    0.255000] -s5m8767_pmic_probe()
[    0.255000] s5m87xx 1-0066: S5M87xx MFD probe done!!!
[    0.255000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[    0.255000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[    0.255000] s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
[    0.260000] s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
[    0.260000] s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter
[    0.260000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[    0.260000] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.260000] Bluetooth: Core ver 2.16
[    0.260000] NET: Registered protocol family 31
[    0.260000] Bluetooth: HCI device and connection manager initialized
[    0.260000] Bluetooth: HCI socket layer initialized
[    0.260000] Bluetooth: L2CAP socket layer initialized
[    0.260000] Bluetooth: SCO socket layer initialized
[    0.260000] cfg80211: Calling CRDA to update world regulatory domain
[    0.260000] Switching to clocksource mct-frc
[    0.261732] NET: Registered protocol family 2
[    0.261909] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.262525] TCP established hash table entries: 131072 (order: 8, 1048576 byt
es)
[    0.262800] Switched to NOHz mode on CPU #0
[    0.263022] Switched to NOHz mode on CPU #3
[    0.263029] Switched to NOHz mode on CPU #1
[    0.263037] Switched to NOHz mode on CPU #2
[    0.264073] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    0.264877] TCP: Hash tables configured (established 131072 bind 65536)
[    0.264894] TCP reno registered
[    0.264908] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.264945] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.265236] NET: Registered protocol family 1
[    0.265387] Trying to unpack rootfs image as initramfs...
[    0.316246] Freeing initrd memory: 896K
[    0.316344] PMU: registered new PMU device of type 0
[    0.316516] Exynos4 : ARM Clock down on idle mode is enabled
[    0.317359] regulator_consumer_probe: loading tc4-regulator-consumer
[    0.317378]  Register vdd_consumer_early_suspend done
[    0.317995] Loaded driver for PL330 DMAC-0 s3c-pl330
[    0.318011]  DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    0.318317] Loaded driver for PL330 DMAC-1 s3c-pl330
[    0.318332]  DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.318430] Loaded driver for PL330 DMAC-2 s3c-pl330
[    0.318445]  DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.336848] highmem bounce pool size: 64 pages
[    0.337039] ashmem: initialized
[    0.345409] fuse init (API version 7.16)
[    0.345727] msgmni has been set to 673
[    0.346339] io scheduler noop registered
[    0.346352] io scheduler deadline registered
[    0.346409] io scheduler cfq registered (default)
[    0.353321]
[    0.353324]  CPU type:
[    0.353334]  Exynos 4412
[    0.364070] parent clock: 800000000, vclk: 87496000, vclk div: 9
[    0.364093] (s3cfb_backlight_on, 304): VLED_ON

1020165558

[    0.369109] (s3cfb_backlight_on, 327): LCD_PWM_ON
[    0.374121] (s3cfb_backlight_on, 347): TP1_EN_ON
[    0.379145] s3cfb s3cfb.0: registered successfully
[    0.379473] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.700273] s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C640
0/10
[    0.780061] s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C640
0/10
[    0.865055] s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C640
0/10
[    1.893144] console [ttySAC2] enabled
[    1.975059] s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C640
0/10
[    2.056009] SI GPS Initialize
[    2.057761] max485_ctl Initialize
[    2.061068] leds Initialize
[    2.063961] pwm_ctl  initialized
[    2.066843] exynos_adc_probe, 124
[    2.069997] exynos_adc_probe, 134
[    2.073429] exynos_adc_probe, 136
[    2.076605] adc      initialized
[    2.085568] brd: module loaded
[    2.090256] loop: module loaded
[    2.091956] pmem: 0 init
[    2.094729] pmem_gpu1: 0 init
[    2.098631] CAN device driver interface
[    2.101233] PPP generic driver version 2.4.2
[    2.105839] usbcore: registered new interface driver dm9601
[    2.111158] usbcore: registered new interface driver dm9620
[    2.116734] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.123191]
[    2.123194]
[    2.123197]  [usb_host_phy_init]++++++++++++++
[    2.130655] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[    2.135699] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[    2.142824] s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
[    2.155044] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[    2.159069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc
dDevice=0300
[    2.167143] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[    2.174343] usb usb1: New USB device Class: Class=9, SubClass=0, Protocol=0
[    2.181286] usb usb1: Product: S5P EHCI Host Controller
[    2.186493] usb usb1: Manufacturer: Linux 3.0.15 ehci_hcd
[    2.191874] usb usb1: SerialNumber: s5p-ehci
[    2.196651] hub 1-0:1.0: USB hub found
[    2.199858] hub 1-0:1.0: 3 ports detected
[    2.204417] usbcore: registered new interface driver cdc_acm
[    2.209496] cdc_acm: USB Abstract Control Model driver for USB modems and ISD
N adapters
[    2.217481] Initializing USB Mass Storage driver...
[    2.222477] usbcore: registered new interface driver usb-storage
[    2.228331] USB Mass Storage support registered.
[    2.233159] usbcore: registered new interface driver usbserial
[    2.238747] usbserial: USB Serial Driver core
[    2.243182] USB Serial support registered for GSM modem (1-port)
[    2.249215] usbcore: registered new interface driver option
[    2.254632] option: v0.7.2:USB Driver for GSM modems
[    2.259776] s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Elec
tronics
[    2.259782] s3c-udc : version 15 March 2009
[    2.273374] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.278790] android_usb gadget: Number of LUNs=3
[    2.283390]  lun0: LUN: removable file: (no medium)
[    2.288249]  lun1: LUN: removable file: (no medium)
[    2.293110]  lun2: LUN: removable file: (no medium)
[    2.298224] android_usb gadget: android_usb ready
[    2.302880] mousedev: could not register psaux device, error: -16
[    2.308734] mousedev: PS/2 mouse device common for all mice
[    2.314932] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    2.321574] input: samsung-keypad as /devices/platform/samsung-keypad/input/i
nput1
[    2.328885] usbcore: registered new interface driver xpad
[    2.334015] usbcore: registered new interface driver usb_acecad
[    2.339810] acecad: v3.2:USB Acecad Flair tablet driver
[    2.345124] usbcore: registered new interface driver aiptek
[    2.350572] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Lin
ux 2.6.x)
[    2.358468] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paas
sen
[    2.365963] usbcore: registered new interface driver gtco
[    2.371231] GTCO usb driver version: 2.00.0006
[    2.375588] usbcore: registered new interface driver hanwang
[    2.381404] usbcore: registered new interface driver kbtab
[    2.386767] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[    2.392602] usbcore: registered new interface driver wacom
[    2.397964] wacom: v1.52:USB Wacom tablet driver
[    2.403321] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
[    2.408003] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[    2.413455] s3c_rtc_gettime() 2165-25-45 45:85:75
[    2.418454] using rtc device, s3c, for alarms
[    2.422290] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[    2.431419] s5m_rtc_read_time: 2012/1/1 0:11:19(0)
[    2.435822] s5m_rtc_read_alarm: 2000/0/1 0:0:0(-1)
[    2.441028] s5m_rtc_read_time: 2012/1/1 0:11:19(0)
[    2.444499] s5m-rtc s5m-rtc: rtc core: registered s5m-rtc as rtc1
[    2.450821] s5m-rtc s5m-rtc: RTC CHIP NAME: s5m-rtc
[    2.455405] i2c /dev entries driver
[    2.459806] Linux media interface: v0.10
[    2.462984] lirc_dev: IR Remote Control driver registered, major 251
[    2.469090] IR NEC protocol handler initialized
[    2.473600] IR RC5(x) protocol handler initialized
[    2.478373] IR RC6 protocol handler initialized
[    2.482887] IR JVC protocol handler initialized
[    2.487400] IR Sony protocol handler initialized
[    2.492001] IR RC5 (streamzap) protocol handler initialized
[    2.497557] IR LIRC bridge handler initialized
[    2.501983] Linux video capture interface: v2.00
[    2.506672] ov5640_module_init
[    2.510045] usb 1-3: new high speed USB device number 2 using s5p-ehci
[    2.516539] s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
[    2.522411] s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
[    2.528748] Initialize JPEG driver
[    2.532258] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
[    2.538838] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
[    2.545568] i2c i2c-0: attached s5p_ddc into i2c adapter successfully
[    2.551904] i2c-core: driver [s5p_ddc] using legacy suspend method
[    2.557972] i2c-core: driver [s5p_ddc] using legacy resume method
[    2.564051] S5P HPD Driver, (c) 2009 Samsung Electronics
[    2.569716] S5P CEC Driver, (c) 2009 Samsung Electronics
[    2.575638] MFC(Multi Function Codec - FIMV v5.x) registered successfully
[    2.581861] Samsung Graphics 2D driver, (c) 2011 Samsung Electronics
[    2.588224] Mali: init_mali_clock mali_clock c08dac84
[    2.595580] Mali: failed to get cpufreq level for 1200MHzMali: Mali device dr
iver  loaded
[    2.612891] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[    2.618891] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq e
nabled
[    2.626967] device-mapper: uevent: version 1.0.3
[    2.631159] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-d
evel@redhat.com
[    2.639286] Bluetooth: HCI UART driver ver 2.2
[    2.643689] Bluetooth: HCI H4 protocol initialized
[    2.648484] Bluetooth: HCI BCSP protocol initialized
[    2.653446] Bluetooth: HCILL protocol initialized
[    2.658125] Bluetooth: HCIATH3K protocol initialized
[    2.663084] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcd
Device=a1a0
[    2.671121] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    2.678273] usb 1-3: New USB device Class: Class=9, SubClass=0, Protocol=2
[    2.685555] cpuidle: using governor ladder
[    2.685734] hub 1-3:1.0: USB hub found
[    2.685906] hub 1-3:1.0: 3 ports detected
[    2.697884] cpuidle: using governor menu
[    2.700907] mshci: Mobile Storage Host Controller Interface driver
[    2.706964] mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
[    2.713217] clock source 0: sclk_dwmci (160000000 Hz)
[    2.718166] dw_mmc dw_mmc: clock source 0: sclk_dwmci (160000000 Hz)
[    2.724725] mmc0: Version ID 0x5342240a.
[    2.728403] mjdbg: cmu_max_clcok:800000000
[    2.732481] mjdbg: host->max_clk: 800000000

1020165558

[    2.736870] mmc0: FIFO WMARK FOR RX 0x11 WX 0x1. ###########
[    2.743683] mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
[    2.749077] sdhci: Secure Digital Host Controller Interface driver
[    2.755052] sdhci: Copyright(c) Pierre Ossman
[    2.756038] mmc0:mshci_set_clock, 400000@ration:4,11[mjdbg] cmu_set_clock: 40
0000
[    2.766931] s3c-sdhci s3c-sdhci.2: clock source 0: sclk_mmc (10666666 Hz)
[    2.770034] *******mmc0: inserted!!!!!******
[    2.770842] mmc0: cmd 52 response timeout error
[    2.773684] mmc0: cmd 52 response timeout error
[    2.784789] mmc0: cmd 8 response timeout error
[    2.787696] mmc0: cmd 5 response timeout error
[    2.789498] mmc0: cmd 5 response timeout error
[    2.791311] mmc0: cmd 5 response timeout error
[    2.793113] mmc0: cmd 5 response timeout error
[    2.795969] mmc0: cmd 55 response timeout error
[    2.798809] mmc0: cmd 55 response timeout error
[    2.801661] mmc0: cmd 55 response timeout error
[    2.804498] mmc0: cmd 55 response timeout error
[    2.827131] mmc1: no vmmc regulator found
[    2.831249] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[    2.838133] wake enabled for irq 359
[    2.841904] s3c-sdhci s3c-sdhci.3: clock source 0: sclk_mmc (10666666 Hz)
[    2.848470] sdhci_s3c_probe: set MMC_PM_IGNORE_PM_NOTIFY for mmc2 pm_flags
[    2.855306] sdhci_s3c_probe: set MMC_PM_KEEP_POWER | MMC_PM_WAKE_SDIO_IRQ for
mmc2 pm_caps
[    2.858759] mmc0:mshci_set_clock, 50000000@ration:4,11[mjdbg] cmu_set_clock:
50000000
[    2.870302] mmc0: new high speed DDR MMC card at address 0001
[    2.870605] mmcblk0: mmc0:0001 MAG2GA 14.5 GiB
[    2.872575]  mmcblk0: p1 p2 p3 p4
[    2.884928] mmc2: no vmmc regulator found
[    2.889096] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
[    2.901340] usbcore: registered new interface driver usbhid
[    2.905450] usbhid: USB HID core driver
[    2.910080] logger: created 256K log 'log_main'
[    2.913897] logger: created 256K log 'log_events'
[    2.915093] *******mmc2: inserted!!!!!******
[    2.922857] logger: created 256K log 'log_radio'
[    2.927456] logger: created 256K log 'log_system'
[    2.932584] GPS: mt3326_gps_power: Switching GPS device on
[    2.937483] GPS: mt3326_gps_power: ignore power control: 1
[    2.942947] GPS: mt3326_gps_probe: Registering chardev
[    2.948074] GPS: mt3326_gps_probe: major: 249, minor: 0
[    2.953532] GPS: mt3326_gps_probe: Done
[    2.958379] Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
[    2.960078] *******mmc2: inserted!!!!!******
[    2.968092] audss_init: RCLK SRC[busclk]
[    2.971197] usb 1-3.2: new full speed USB device number 3 using s5p-ehci
[    3.005082] *******mmc2: inserted!!!!!******
[    3.055218] *******mmc2: inserted!!!!!******
[    3.076531] usb 1-3.2: not running at top speed; connect to a high speed hub
[    3.082405] usb 1-3.2: config 1 interface 0 altsetting 0 endpoint 0x83 has an
invalid bInterval 0, changing to 32
[    3.099831] asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
[    3.105582] asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
[    3.110575] Samsung SRP driver, (c) 2010 Samsung Electronics
[    3.126140] SRP: Driver successfully probed
[    3.128987] ALSA device list:
[    3.131843]   #0: iTOP-4412-Audio
[    3.135205] GACT probability NOT on
[    3.138594] Mirror/redirect action on
[    3.142237] u32 classifier
[    3.144927]     Actions configured
[    3.148310] Netfilter messages via NETLINK v0.30.
[    3.153058] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    3.159858] ctnetlink v0.93: registering with nfnetlink.
[    3.164419] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    3.171331] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    3.177387] xt_time: kernel timezone is -0000
[    3.182047] usb 1-3.2: New USB device found, idVendor=0a46, idProduct=9621, b
cdDevice=0101
[    3.182970] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.183102] arp_tables: (C) 2002 David S. Miller
[    3.183145] TCP cubic registered
[    3.183989] NET: Registered protocol family 10
[    3.187236] Mobile IPv6
[    3.187265] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.187487] IPv6 over IPv4 tunneling driver
[    3.191958] NET: Registered protocol family 17
[    3.191989] NET: Registered protocol family 15
[    3.191996] can: controller area network core (rev 20090105 abi 8)
[    3.192068] NET: Registered protocol family 29
[    3.192075] can: raw protocol (rev 20090105)
[    3.192171] Bluetooth: RFCOMM TTY layer initialized
[    3.192188] Bluetooth: RFCOMM socket layer initialized
[    3.192195] Bluetooth: RFCOMM ver 1.11
[    3.192202] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.192208] Bluetooth: BNEP filters: protocol multicast
[    3.192232] NET: Registered protocol family 35
[    3.192485] EXYNOS4X12: Adaptive Support Voltage init
[    3.192494] EXYNOS4X12(SG):  ORIG : 2 MOD : 0 RESULT : 2
[    3.192500] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9
rev 4
[    3.284765] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber
=3
[    3.284774] usb 1-3.2: New USB device Class: Class=0, SubClass=0, Protocol=0
[    3.303898] Registering SWP/SWPB emulation handler
[    3.308648] DVFS : VDD_ARM Voltage table set with 2 Group
[    3.314802] dm962x: dm_read_reg() 0x29 0x0a
[    3.318404] dm962x: dm_read_reg() 0x28 0x46
[    3.322525] dm962x: dm_read_reg() 0x2b 0x96
[    3.330097] dm962x: dm_read_reg() 0x2a 0x21
[    3.332893] dm962x: dm_read_reg() 0xF2 0x00
[    3.336988] dm962x:  [Analysis.2] 0xF2, D[7] 0 OK
[    3.341679] dm962x:  [Analysis.2] 0xF2, D[6] 0 OK
[    3.341949] exynos4_pm_hotplug_device_init: 0
[    3.341954] EXYNOS4 PM-hotplug init function
[    3.345341] regulator_init_complete: VDD18_MIPI: incomplete constraints, leav
ing on
[    3.345769] regulator_init_complete: VDD10_MIPI: incomplete constraints, leav
ing on
[    3.346195] regulator_init_complete: VDD18_2M: incomplete constraints, leavin
g on
[    3.347885] regulator_init_complete: vdd_int range: incomplete constraints, l
eaving on
[    3.348312] regulator_init_complete: vdd_arm range: incomplete constraints, l
eaving on
[    3.348740] regulator_init_complete: vdd_mif range: incomplete constraints, l
eaving on
[    3.348980] USB_DEVICE_ATTACHED
[    3.350158] exynos_usb_Device: Exynos USB Device Driver
[    3.385029] ==ft5x0x_ts_init: reset==
[    3.413378] dm962x:  [Analysis.2] 0xF2, D[5] 0 EP1: Empty
[    3.418748] dm962x:  [Analysis.2] 0xF2, D[3] 0 OK
[    3.423434] dm962x:  [Analysis.2] 0xF2, D[2] 0 OK
[    3.428121] dm962x:  [Analysis.2] 0xF2, D[1] 0 OK
[    3.432813] dm962x:  [Analysis.2] 0xF2, D[0] 0 Status: TX buffer 0 pkts
[    3.445560] dm962x: ethernet MAC address 00:00:ff:ff:00:00 (chip)
[    3.450559] dm962x: 9620 Mode = 128
[    3.462452] usb 1-3: clear tt 2 (0030) error -71
[    3.473576] usb 1-3: clear tt 2 (0030) error -71
[    3.484701] usb 1-3: clear tt 2 (0030) error -71
[    3.495826] usb 1-3: clear tt 2 (0030) error -71
[    3.506951] usb 1-3: clear tt 2 (8030) error -71
[    3.518076] usb 1-3: clear tt 2 (0030) error -71
[    3.529200] usb 1-3: clear tt 2 (0030) error -71
[    3.540326] usb 1-3: clear tt 2 (0030) error -71
[    3.551451] usb 1-3: clear tt 2 (8030) error -71
[    3.562576] usb 1-3: clear tt 2 (0030) error -71
[    3.573701] usb 1-3: clear tt 2 (0030) error -71
[    3.584825] usb 1-3: clear tt 2 (8030) error -71
[    3.595951] usb 1-3: clear tt 2 (0030) error -71
[    3.607076] usb 1-3: clear tt 2 (0030) error -71
[    3.618201] usb 1-3: clear tt 2 (0030) error -71
[    3.629326] usb 1-3: clear tt 2 (8030) error -71
[    3.640451] usb 1-3: clear tt 2 (0030) error -71
[    3.651585] usb 1-3: clear tt 2 (0030) error -71
[    3.660533] dm9620 1-3.2:1.0: eth0: register 'dm9620' at usb-s5p-ehci-3.2, Da
vicom DM9620 USB Ethernet, 00:00:ff:ff:00:00
[    3.672214] usb 1-3: clear tt 2 (8030) error -71

topeet_sky

串口输出的时候，卡在哪个地方

admin

是精英版吗？是不是没有插WIFI模块，但设置里把WIFI打开了？

maoxue121225

怎样在设置里关闭wifi?

topeet_develop

楼主，需要说明具体在哪一行会卡住，默认情况下Linux的Wifi功能是不会打开的，Android的WiFi通过Settting界面关闭掉，再试试看。